Announcement

Collapse
No announcement yet.

Replaced fork seals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Replaced fork seals

    Decided to replace my leaking fork seals on the GS850 today. Found the easiest way to pull the old seal out was to take a propane torch to the seal and then use a screwdriver to pop it out. Both seals came out without any issues at all. I feel it's the easiest way to get them out. Just wanted to share and let those that have reported issues getting them out using other ways.

    On a plus note, the bike rides MUCH better now that everything is back in working order. The only issue I had was I broke the air inlet on one fork by being a little aggressive when sealing the cap.

    So, now I'm needing a replacement. Stock replacement is going for around $13.00. Luckily I had one on the project GS1000 that I could borrow so I'm not without a ride.
    http://img633.imageshack.us/img633/811/douMvs.jpg
    1980 GS1000GT (Daily rider with a 1983 1100G engine)
    1998 Honda ST1100 (Daily long distance rider)
    1982 GS850GLZ (Daily rider when the weather is crap)

    Darn, with so many daily riders it's hard to decide which one to jump on next.;)

    JTGS850GL aka Julius

    GS Resource Greetings
Working...
X