Announcement

Collapse
No announcement yet.

New rotors be expensive. Options?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    New rotors be expensive. Options?

    Was just quoted $225 each for EBC brand from my local aftermarket place. I can maybe get 10% off but I'm looking at getting three so daaaaaaaang that is a lot of bread

    I grooved the rear pretty good not paying attention and the front were pretty wicked when I got them.

    No I have no measured them yet so I gotta do that and then see if I can find someone in San Jose who knows how to turn them.

    Any other leads? There are some from China on ebay for about $140. Ug.

    Thanks all for reading and any advice you can offer.

    #2
    Originally posted by littleroot View Post
    Was just quoted $225 each for EBC brand from my local aftermarket place. I can maybe get 10% off but I'm looking at getting three so daaaaaaaang that is a lot of bread

    I grooved the rear pretty good not paying attention and the front were pretty wicked when I got them.

    No I have no measured them yet so I gotta do that and then see if I can find someone in San Jose who knows how to turn them.

    Any other leads? There are some from China on ebay for about $140. Ug.

    Thanks all for reading and any advice you can offer.
    I had that problem with my front rotors. If your careful you can get some very serviceable replacements on eBay. I got two near new, no scoring or ridges for 40 bucks shipped.

    EBC is great equipment and look great if you have plenty of disposable income.

    Cheers

    Comment


      #3
      You can't turn GS rotors, you'd need to have them ground.

      The 1100E bike could be upgraded the same way Tom' Hot Rod was with the CBR rotors & twin pots... Another alternative.

      Dan
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        I've used a company listed on eBay that provides surface grinding & drilling.
        Had Suzuki GT750 rotors surfaced & drilled -- turned out quite nice.

        $55 per rotor for surfacing + $18 for return shipping of 3 rotors.
        http://www.ebay.com/itm/SUZUKI-GS400...-/300736151514

        But like others have indicated, used rotors via eBay likely will be cheaper.

        Comment


          #5
          I have a pile of serviceable rotors I can sell.
          http://img.photobucket.com/albums/v5...tatesMap-1.jpg

          Life is too short to ride an L.

          Comment


            #6
            Here is a nice front pair at a fair price: http://www.ebay.com/itm/Suzuki-gs110...item461dffbb0c

            Comment

            Working...
            X