I'm guessing for the shaft drive??
Announcement
Collapse
No announcement yet.
GS850G Rear Wheel Bearings - Quantity 3??
Collapse
X
-
GS850G Rear Wheel Bearings - Quantity 3??
OK, dumb question I'm sure, but the Workshop manual for a GS850G rear wheel assembly only shows a RH and LH Rear Wheel Bearing... WHAT is the 3rd one that came in the All-Balls Bearing kit for?
I'm guessing for the shaft drive??Tags: None
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17441
- Indianapolis
Hard to tell what kit you have -- it sounds like you ended up with a kit for a chain drive bike, but all may not be lost -- look closely at the actual bearings for the bearing numbers. They're usually laser-etched into the steel, and they tend to be very small.
An 850G or GL requires two 6303 bearings in the rear wheel (there's no third bearing, since there's no sprocket carrier, since there's no sprocket, 'cos there's no chain...) There are no bearings in the shaft drive mechanism that will need replacement.
The front wheel takes two 6302 bearings.
So if you have two 6303 bearings in that kit, you have what you need. What's the other bearing? Maybe someone will want it.
If you don't at least have two bearings you need, you'll need to return the kit and get the correct one.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
-
Darin Jordan
Ok. Thank you! The part numbers you provided helped. Turns out I have the 6303 bearings.... just 3 of them.
So it looks like I'm set there.
Now, if I hadn't just found out that the replacement rear rotor is the wrong style.
Off to find one of those now.
Comment
Comment