Announcement

Collapse
No announcement yet.

Free brake pads

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Free brake pads

    Brake pads captioned.jpgHere's the deal:
    I ordered brake pads online for my GS1100ES and theysent me these, not for an ES.
    I know they fit a whole bunch of GS models if these are the ones you need you likely know better than I do what models.
    The company was going to stiff me with these, told me they sent the correct ones and that was that.
    I can be rather tenacious in these matters and after making a big enough stink, they sent me the correct pads no charge and didn’t ask for these ones back.
    I would like these to go to someone who’s on shortbudget and could use these to lighten the load of owning a vintage bike.
    If you can afford to buy your brake pads, let thesego to someone who can use the help, fist come first served.
    All I ask is that you pay the actual shipping cost to your location, send me your Postal/Zipcode and I’ll tell you what the shipping will cost.
    Rod
    Last edited by Guest; 07-28-2014, 04:59 PM.

    #2
    Atta boy!
    1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

    2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

    Comment


      #3
      PM sent, not in dire need, and my guess is there's someone that needs them more than I do, but if not, I sure could use some new brake pads for my bike. My forks were leaking all over my calipers when I got the bike so I re-sealed them and cleaned, heated, cleaned and re-installed the pads although I know you are not supposed to...
      ----------------------------------------------------------------
      2014 BMW F800GSA | 1981 GS850GX | 1982 GS750T (now the son-in-laws) | 1983 GS750ES | 1983 Honda V45 Magna (needs some love) | 1980 Yamaha GT80 and LB80 "Chappy" | 1973 and 1975 Honda XL250 projects

      Comment


        #4
        Originally posted by mikerophone View Post
        PM sent, not in dire need, and my guess is there's someone that needs them more than I do, but if not, I sure could use some new brake pads for my bike. My forks were leaking all over my calipers when I got the bike so I re-sealed them and cleaned, heated, cleaned and re-installed the pads although I know you are not supposed to...
        Been there done that in years past!
        I somehow deleted your PM, send me the Zip again.
        Thanks Rod

        Comment

        Working...
        X