Thank you for any information !frontBr.jpg
Announcement
Collapse
No announcement yet.
79’ GS750 Front Master Cylinder help PLEASE !
Collapse
X
-
79’ GS750 Front Master Cylinder help PLEASE !
’m rebuilding a front master cylinder on my 79’ GS750 I did not disassemble this bike (got in boxes !) and my question is in the direction one small cup goes, if you look at the photo, the rubber cup that the screw driver is pointing to, dose it go in to the cylinder cupping up (little nipple up) or cup down ? all the images I can find just dose not show any detail.
Thank you for any information !frontBr.jpgTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
The spring is backwards, and the rubber cup goes on the end facing the wrong way.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
scamp62
Sorry to ask but dose “the rubber cup goes on the end facing the wrong way” mean the cup is inserted cup down with the nipple in the small hole in the spring cup’s hole ?
again thank you !
Comment
Comment