GS750E 1984 - Front forks seem low down

[Guest]

The front forks seem to compressed. Is there a way to add air to lift the front up? Or should I install
a spacer inside the fork tube to compress the springs a bit more?

I noticed there are holes in the fork tubes that line up with the brackets.
I noticed this when I installed a set of lower handle bars on the bike (bars from a 1995 interceptor).
I had to ensure the lower bracket covered the fork tube holes to keep the air pressure up.

Also there is a tube that runs from one fork tube to the other. I don't see a way to add air.

Any help will be appreciated.

Dave

[BigD_83]

On the 650, there is an air nipple on one of the forks/triple tree, behind a cover, that will look a little a flat-domed nut. It's easy to miss if you aren't looking for it. I thought I had a photograph on Photobucket, but no luck.

[coolio]

Hi,

Thanks for the tip. Found it...the cap looks exactly like one of the bolts that hold the forks in place...

Thanks alot for the tip...Dave