Announcement
Collapse
No announcement yet.
Center stand mind game
Collapse
X
-
Rob...pocket full of buckshot. Hand full over the shoulder and the windshield and possibly radiator are gone. Now that is if you really want to be the king azzhole of the road...LOLMY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
-
The bike is off the pipes right now, but I will run this test ASAP;
The noise if on both on-choke, so 2000+ RPM, and off the choke I.E. 1100 RPM; even when bike is warm where I put it on the sidestand with engine on.
By the way, speaking of pipes, what kind of gasket do you use, the squash-type copper one:
http://www.ebay.it/itm/COPPER-EXHAUST-GASKETS-SUZUKI-GS750-GS850-GS1000-set-of-4-/300605023712
or this one:
my bike is currently missing them, and I have got some fouling off #2 header;
ThanksLast edited by Lorenzo; 03-21-2015, 01:10 PM.GS1000G '81
Comment
-
Originally posted by Lorenzo View PostThe bike is off the pipes right now, but I will run this test ASAP;
The noise if on both on-choke, so 2000+ RPM, and off the choke I.E. 1100 RPM; even when bike is warm where I put it on the sidestand with engine on.
By the way, speaking of pipes, what kind of gasket do you use, the squash-type copper one:
or this one:
my bike is currently missing them, and I have got some fouling off #2 header;
Thankshttps://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E Project
Comment
-
Originally posted by Lorenzo View PostThe bike is off the pipes right now, but I will run this test ASAP;
The noise if on both on-choke, so 2000+ RPM, and off the choke I.E. 1100 RPM; even when bike is warm where I put it on the sidestand with engine on.
By the way, speaking of pipes, what kind of gasket do you use, the squash-type copper one:
http://www.ebay.it/itm/COPPER-EXHAUST-GASKETS-SUZUKI-GS750-GS850-GS1000-set-of-4-/300605023712
or this one:
my bike is currently missing them, and I have got some fouling off #2 header;
Thankshttps://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E Project
Comment
Comment