Announcement

Collapse
No announcement yet.

GS550 spokes/mag question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS550 spokes/mag question

    I have a 77 GS550 with the spoke wheels (disc front/drum rear) and was wondering if the mag wheels from a GS550L model would fit without any modifications. Wanted to roll with black wheels but painting spokes is probably not a good idea and I can get the mag wheels from an L model for pretty cheap and paint it. Anyone try this? My bike below.


    #2
    Wow what a gorgeous bike
    Shame you dont like the spokes they are swesome looking though

    Comment


      #3
      The rear wheel will be a different size, but will probably fit OK.

      Did the L have a disk or drum brake on the rear? If it was a disk, it will be a harder swap.

      You might need to adjust some spacers on either side of the rear wheel.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        83-86 550 ls had drum brakes on the rear

        Comment


          #5
          I agree, painting them black is not a good idea.
          Spoke wheels in excellent condition like yours are hard to come by.
          2@ \'78 GS1000

          Comment


            #6
            My 550L parts bike had a disc brake. Swap the swing arm and brake and everything and it will work.
            http://img.photobucket.com/albums/v5...tatesMap-1.jpg

            Life is too short to ride an L.

            Comment


              #7
              Hmmm...would prefer to stick with drums in back as that would simplify the install...will look into a set for a 83 L model...thx!

              Comment

              Working...
              X