Announcement

Collapse
No announcement yet.

Another 1100 swingarm to 78 750 question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by TeamNeal View Post
    I just spoke with a really cool engine builder/machinist and he is going to turn some steel sleeves 1mm wall thickness to press into the 1100 spacers. That way I can use my 750 pivot bolt.
    Sounds like that would work nicely.
    sigpicMrBill Been a GSR member on and off since April 2002
    1980 GS 750E Bought new in Feb of 1980
    2015 CAN AM RTS


    Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

    Comment

    Working...
    X