Braided Steel lines

[Guest]

http://www.ebay.com/itm/251232608961?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Will these fit my 82 1100L, or would they be too short?

Leon

[1tinindian]

30 views and no input?
Maybe these aren't as important to change, as I was lead to believe.

I would like to be able to buy pre-made lines, over making my own.

Leon

[raygun]

Depends on which handlebars you have I think.

[Nessism]

Measure the length of your lines and then message the guy to be sure they are the proper length.

[loud et]

Measure the length of your lines and then message the guy to be sure they are the proper length.

Bingo.....

[1tinindian]

Message sent.
The length of the lines to fit my bike are 42", when converting to a 2 line (hose) setup.
Just not real sure of the degree of angle for the fittings at the master cylinder
Any ideas?
Thanks.
Leon

[Nessism]

Depends on your master and the angle you need.

I'm a big proponent of Earl's lines since you can customize the setup exactly how you desire.

[hannibal]

Check out rennsportautoparts on ebay. Best prices I found and the lines were great. They came in an Apex branded box. Message him for quote.

[Thumper88]

Check out rennsportautoparts on ebay. Best prices I found and the lines were great. They came in an Apex branded box. Message him for quote.

I recommend this as well...you get to choose length, color, and type of fittings. Used them for my GS450.