Announcement

Collapse
No announcement yet.

Front fork bushings for 1979 GS1000E

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    OK I have found the guide bushings I need to repair my fork. So if any one ever has this problem again go to (SDI) Suspension Direct they carry the 37mm guide bushings Part # SFGB37 Thank you for all the comments and help...

    Comment


      #17
      Let us know how that works out for you...
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

      Comment


        #18
        Received and installed the new guide sleeve/bushing, oil seal and other seals. front end is back together. New tire and brakes, now points. Almost ready.... Thanks everyone

        Comment


          #19
          Originally posted by Mitch View Post
          Received and installed the new guide sleeve/bushing, oil seal and other seals. front end is back together. New tire and brakes, now points. Almost ready.... Thanks everyone
          Get some new Sonic fork springs while you are at it.
          sigpicMrBill Been a GSR member on and off since April 2002
          1980 GS 750E Bought new in Feb of 1980
          2015 CAN AM RTS


          Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

          Comment


            #20
            Originally posted by mrbill5491 View Post
            Get some new Sonic fork springs while you are at it.
            You will be very glad you did. They aren't expensive, either.
            http://www.thegsresources.com/_forum...ine=1352313915
            1979 GS1000

            Comment


              #21
              is this an oem '79 gs1000e front fork part?

              what in the cryptic hell is going on here? I have a '79 gs1000e and the parts list doesn't show this part. A google search on the part number shows several sellers saying it is used on the 79gs1000. I'm planning on putting in new fork seals and sonic 1.0 (and hopefully mikes XS cartridge emulators). But if this thing is a load bearing surface then I'll be looking closely.. did we figure out here that the OP has a later model front end?
              1979 gs1000e (everyday) 1977 gs750 for sale
              1983 yam xj550 maxim streetbob sold
              1995 gsx750F everyday fighterjet 1990 gsx1100F for sale
              2000kaw zx600
              2003 BMW K1200GT sport tour
              2000Buel Cyclone M2 motorwork
              1984 Yam venture xvz1200 -long ride/cold ride ride gf ride..
              1978 Honda cb750F3 supersport top end (still)
              1976 Harley FL 3/8" S&S stroker - motor out way too long
              1980 Harley fxs80 - wacked good on this one

              Comment

              Working...
              X