Announcement

Collapse
No announcement yet.

Quick question please - fork seal orientation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Quick question please - fork seal orientation

    This end is up?
    20160807_224722.jpg
    sigpic
    When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

    Glen
    -85 1150 es - Plus size supermodel.
    -Rusty old scooter.
    Other things I like to photograph.....instagram.com/gs_junkie
    https://www.instagram.com/glen_brenner/
    https://www.flickr.com/photos/152267...7713345317771/

    #2
    ...I hope it was...
    sigpic
    When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

    Glen
    -85 1150 es - Plus size supermodel.
    -Rusty old scooter.
    Other things I like to photograph.....instagram.com/gs_junkie
    https://www.instagram.com/glen_brenner/
    https://www.flickr.com/photos/152267...7713345317771/

    Comment


      #3
      Not sure from your pic, but normally the "open" side with the spring goes down. The top side should just be solid.
      Current:
      Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)

      Past:
      VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
      And a bunch of other crap Yamahas....

      Comment


        #4
        No big deal - it will either be ok or start to leak.....which means you get to practice your fork seal replacement again.
        Current:
        Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)

        Past:
        VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
        And a bunch of other crap Yamahas....

        Comment


          #5
          Ha, that's just what it did. That side was leaking. Judging by the lips in the seal, Im pretty certain that that one was flipped. Both sides had springs, but one side had the pictured raised lip...
          I'll find out soon.....
          sigpic
          When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

          Glen
          -85 1150 es - Plus size supermodel.
          -Rusty old scooter.
          Other things I like to photograph.....instagram.com/gs_junkie
          https://www.instagram.com/glen_brenner/
          https://www.flickr.com/photos/152267...7713345317771/

          Comment


            #6
            The lettering on the seal goes out.
            Alan

            sigpic
            Weaned on a '74 450 Honda
            Graduated to an '82 GS850GL
            Now riding an '83 GS1100GL
            Added an '82 GS1100GL

            Comment


              #7
              Its back together- im pretty certain that its sorted out now. Thanks.
              sigpic
              When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

              Glen
              -85 1150 es - Plus size supermodel.
              -Rusty old scooter.
              Other things I like to photograph.....instagram.com/gs_junkie
              https://www.instagram.com/glen_brenner/
              https://www.flickr.com/photos/152267...7713345317771/

              Comment

              Working...
              X