Need new swing arm bearings for 82' 1100gk, any known good sources?

[urbnbrzln]

If you can get a Dremel in with a diamond cutting disc, and slice / weaken the race track it will be more amenable to popping out. Alternatively, using a stick welder, lay a bead along the inside (bearing surface) and the cooling of the weld will shrink the entire race enough to loosen it. A combo of both techniques will have them out, I would think. The weld trick on its own worked for me on numerous steering head bearings.

Cool I will try both methods. I don't have a stick welder, but I got a little hobart that might do the trick. Thank you!