Brake hoses-again

[letchworth rider]

I am trying to find replacement brake hoses for my 81 GS750EX. I ordered a set from Cycleplicity. A bit long and a 90 degree bend at the master, but usable. Did not even get te bike on the the road when the metal elbow BROKE. Made sure it did not cotagt the handle bar. Called for a return, looks like I will never hear from the again.

Do not want to buy do it yourself lines, as they are illegal in this state, where have you bought with good results?
The 16 valve bikes hoses seem to be rare. Do the earlier (77 to 79) hoses fit?

It IS going on the road this year!

[tom203]

What state are you in where the inspectors can tell the difference?
if you still have original hoses, take them to a place that specializes in hydraulic hoses (very common) and have them make a set.

I like to have backup stuff.. have a look at this,might be good while you get some new stuff made up

http://www.ebay.com/itm/1981-Suzuki-GS750E-OEM-Front-Brake-Disc-Calipers-Brake-Lines-Set-2-/272505014500?hash=item3f729088e4:g:PtQAAOSwImRYaAeN&vxp=mtr

[letchworth rider]

ny. And to make matters worse i was one in a previous occupation.

[Nessism]

There are a bazillion threads in the archives on brake lines. There is a place in Canada that some people go gaga over but I prefer to make my own lines from Earl's parts. Try searching for info. There is tons.

[bwringer]

Spiegler will make custom lines that are DOT approved:

https://spieglerusa.com/brakes/brake-lines-accessories-tools/custom-brake-lines.html

Lines made with threaded fittings aren't technically "legal" anywhere in the US. It's just that enforcement varies tremendously, from no inspections at all to super-picky white glove annual inspections.

[GSXR7ED]

Spiegler will make custom lines that are DOT approved:

https://spieglerusa.com/brakes/brake-lines-accessories-tools/custom-brake-lines.html

Lines made with threaded fittings aren't technically "legal" anywhere in the US. It's just that enforcement varies tremendously, from no inspections at all to super-picky white glove annual inspections.

Interesting site. Thanks!

There are hydraulic service businesses here in Dover, DE. I was fortunate that when I converted to a single braided line, it was in SoCal out in the Inland Empire on Baseline Rd in the City of Upland. I took the hydraulic line and they replicated it (banjos included) for about $20. Easy peasy/Lemon Squeezy.


Ed

[letchworth rider]

That is the route I went. Found a hydraulics shop in Rochester, had the fronts made. What a difference!
Did take a month as their supplier was out of the needed fittings. I need to do the rear also, will wait for the season to end.

[chuck hahn]

I use a place here in Oklahoma City. Central Oklahoma Hose. I think they could make whatever you shipped to them and send them back. They are DOT certified and make exact copies. No harm in spending a few minutes with a phone call. 70 bucks for all 3 front lines on an 82 850G and they made them while i waited.

http://www.centralokhose.com/