Announcement
Collapse
No announcement yet.
110/90 19 front on 1100G?
Collapse
X
-
110/90 19 front on 1100G?
Would it be pushing it to go from a 100/90 19 to a 110/90 19 on my 1100G? I guess my reason is not very pressing. I was thinking of correcting my speedo by getting a slightly taller tire and can't find anything without also increasing the width by about .4 of an inch.1983 GS 1100 Guided Laser
1983 GS 1100 G
2000 Suzuki Intruder 1500, "Piggy Sue"
2000 GSF 1200 Bandit (totaled in deer strike)
1986 Suzuki Cavalcade GV 1400 LX (SOLD)
I find working on my motorcycle mildly therapeutic when I'm not cursing.Tags: None
-
That might correct the speedo error, but will slow down the handling (gives it a heavier 'feel' when steering) and might be a bit too close to the fender bolts.
I think the stock size on the 850 might have been 90/90, going to a 100/90 cured the speedo error.
The 1100 uses the same drive and speedo, I can't imagine why it would read wrong.
One other thing to consider: is it off by a certain percentage or a fixed amount? If it's off by a percentage, a tire change might help. Mine is off by a certain amount (3-4 mph), no matter what speed I am going. That happened when I got a new speedo and had to adjust the odometer reading. When I put the needle back on, it was not in the right position, so my actual speed is about 3 mph faster that what is showing. I need to open it up again, remove the needle, rotate it by 3 mph and put it back on.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Thanks. I guess it's not really too much trouble to just mentally subtract about 10% (more like about 7%). I checked the speedo with a GPS an found about a 7% error but maybe the GPS wasn't perfectly accurate. It was an old hand-held unit I had zip-tied to the bars (middle area by the ignition switch.)1983 GS 1100 Guided Laser
1983 GS 1100 G
2000 Suzuki Intruder 1500, "Piggy Sue"
2000 GSF 1200 Bandit (totaled in deer strike)
1986 Suzuki Cavalcade GV 1400 LX (SOLD)
I find working on my motorcycle mildly therapeutic when I'm not cursing.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35639
- Torrance, CA
The 1100G, not 1100GL, came with a 2.15" front wheel which will support a 110 okay. Most other GS bikes came with a 1.95" wide front so using a 110 on those is pushing things.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
I have wheels off an '82 1100G on my 850, so I have one of those 2.15" wheels.
I have a 100 tire on it, but the stock 1.95" (or was it 1.85" ) would not change the rolling radius.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Originally posted by 1948man View PostWould it be pushing it to go from a 100/90 19 to a 110/90 19 on my 1100G? I guess my reason is not very pressing. I was thinking of correcting my speedo by getting a slightly taller tire and can't find anything without also increasing the width by about .4 of an inch.
Mark1982 GS1100E
1998 ZX-6R
2005 KTM 450EXC
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17455
- Indianapolis
I believe the GK came with a 110/90-19 stock (along with beefier 41mm forks and wider wheel). The G and GL came with 100/90-19.
I've tried a 110 on my 850, and it has an immediate, distinct and unpleasant effect on the handling.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
I just looked at a few parts fiche. Starting in '82 (with the different style wheel), the shafties had 2.15" wheels at the front. All (from 850-1100) had the same 3.50-19 tire.
The '81 850G and 1000G had 1.85" wheels and the same 3.50-19 tire.
OK, not quite the same, the 850 had a 3.50H19, the 1000 had a 3.50V19.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment