850/1000/1100 custom swing arm

[thebrandonbeezy]

FB_IMG_1499277791476 by brandon hobock, on Flickr

ok so its been stated that this particular swinger is for a different suzuki. my friend whos a very talented fabricator recently got his cnc plasma table up and running. he asked if there was any interest in this.
i believe there will be 2 versions
1 stock offset ( bolt on and go) USES STOCK WHEEL SET UP OR VX800 WITH MINOR ADJUSTMENTS
2 offset to the left ( more costly because will need custom drive shaft with 2 joints) to accommodate the wider gsx1100g wheel at 17x4.5 you can run a 160 tire and in some brands a 170. now for the prices..
the stock offset unit will be 500 PLUS shipping
the left offset unit is to be determined..
material will be chromoly, light weight and strong with tig welds on the entire unit
now this will only happen if there is a demand for them. they will be made to order.
let me know if there is any interest??? I think its time the shaft drive bikes got some love, you know..

[thebrandonbeezy]

https://youtu.be/qPbfvEur2tg

cutting out a license plate