GSX750ES 1985 : Front fork (new) stanchions planarization

[Guest]

As part of my nuts and bolts restoration I had the front fork stanchions replaced by a pro.
When I was done with installing the front fork, using an elongated glass, I checked front fork stanchions planarization.
There was a serious amount of free play, meaning the stanchions are not exactly parallel.
I then loosened the 4 bolts of the lower yoke and the 4 bolts of the front wheel axis clamps.
When holding the front wheel firmly using my legs, I turned the handlebar and indeed, the amount of free play of the glass dropped dramatically. However ! I was not able to reduce the free play to zero.
Does this mean that something is bent ? Yokes ? The new stanchions ?

DSC_2668.jpg

[sharpy]

OMG thats one serious amount of big words. Please tell us what you mean. and why you take your forks to a pro. one of the most simple things to rebuild. and u could have used that glass to roll the tubes over it to check how straight they where.

[dpascal]

sharpy,
I use this wonderful forum for 5 years now and I love its professional attitude and professional members. I would appreciate it if you can use a less puffed-up attitude.

[sharpy]

Just that ive re-read ure post a few times and still cant work out what u talking about. And looking what planarization is, im sure most wont know what it means or relates to forks. But im not a expert

[cowboyup3371]

I'm with Sharpy here - can you please tell us what you mean? I just looked up the word planarization as I had never heard of it and I cannot find it in the dictionary I have. Looking at Google, I see something on Wikipedia for drawing graphs from a planar to a non-planar nature and I see something else about chemical polishing.

[dpascal]

English is not my native tongue so I assumed planarization is commonly used. I used it when working for the silicon industry. Basically it means that a surface is straight. It comes from the word plane.
I guess we have have an example where language barriers create miss communication. Sorry for the misunderstanding :-).
What I meant to say is that on each and every straight fork in which the stanchions are completely parallel, putting a piece of glass would stick to the stanchions without any free play.
This is not the case with my fork. I do manage to get things better by loosening lower yoke bolts + front wheel axis bolts and then twisting the handlebar while front wheel is held firmly between my legs.
However they are never completely parallel...

[GSXR7ED]

Thanks for explaining the term:

planarization: Chemical mechanical polishing/planarization is a process of smoothing surfaces with the combination of chemical and mechanical forces. It can be thought of as a hybrid of chemical etching and free abrasive polishing.

Looked that up and google led me to Wiki.

It's definitely not a term used here to test sanctions for complete parallel free play. Sometimes being a little too wordy creates an image of conceit...just an individual opinion but certainly nothing to get defensive about. Lesson learned.

So...back to your question...after reviewing your initial post, here is the question I believe you are looking for the answer:

"There was a serious amount of free play, meaning the stanchions are not exactly parallel."

What do you mean by "free play"? Is it wobbly? Or are the sanctions dipping too deep? It is interesting to read how you describe this scenario.


Ed

[Steve]

May I suggest also loosening the UPPER clamps?

Be sure to support the front of the bike, though. If you loosen the upper and lower clamps at the same time, it's possible the bike will slide down the fork tubes.

By the way, another way to check without using a piece of glass is to hold two straight edges against the fork tubes. Place one as high as you can, near the upper clamp, place the other one as low as you can. Comparing the two edges will show if they are parallel or not.

By the way, your attached picture showed PERFECTLY what you were trying to do, even if you did use a word that is not in common use. And, based on your description, I made an educated guess, THEN looked at the picture for confirmation.

.

[glib]

English is not my native tongue so I assumed planarization is commonly used. I used it when working for the silicon industry. Basically it means that a surface is straight. It comes from the word plane.
I guess we have have an example where language barriers create miss communication. Sorry for the misunderstanding :-).
What I meant to say is that on each and every straight fork in which the stanchions are completely parallel, putting a piece of glass would stick to the stanchions without any free play.
This is not the case with my fork. I do manage to get things better by loosening lower yoke bolts + front wheel axis bolts and then twisting the handlebar while front wheel is held firmly between my legs.
However they are never completely parallel...

Nothing wrong with your description. The one unfamiliar word taken in context does not affect the clarity of the rest of your post—and the picture confirmed the description. The glass is a good tool for this ��.

Come to think of it, I’m not sure what the best word would be to describe the geometric relationship between two things that are meant to be in the same plane. So an “A” for effort there.

[dpascal]

Nothing wrong with your description. The one unfamiliar word taken in context does not affect the clarity of the rest of your post—and the picture confirmed the description. The glass is a good tool for this 👍.

Come to think of it, I’m not sure what the best word would be to describe the geometric relationship between two things that are meant to be in the same plane. So an “A” for effort there.

Thanks!
In any case, here is a video ...

https://youtu.be/sACu3IjCw2o

[sharpy]

That video may suggest ure tubes and/or the triple clamps are bent. With just the forks in the bike. sighting side one if there bent you should see the difference along the length.

[GSXR7ED]

Thanks!
In any case, here is a video ...
https://youtu.be/sACu3IjCw2o

That is challenging to describe...and much better viewed. You would think aligning the upper and lower triples and then bolting the lower tubes to the wheel would line up with no problems.

I'm gonna convert my single front disc "T" to dual disc and knowing this example to test "planarization" (as well as Steve's suggestion) are good to know.

What sort of "steering feel" do you get from the misalignment? I hope I don't run into any problems when I do my conversion.

Thanks for uploading the video...it really helps explain what some of us couldn't picture in our heads.


Ed

[dpascal]

That is challenging to describe...and much better viewed. You would think aligning the upper and lower triples and then bolting the lower tubes to the wheel would line up with no problems.

I'm gonna convert my single front disc "T" to dual disc and knowing this example to test "planarization" (as well as Steve's suggestion) are good to know.

What sort of "steering feel" do you get from the misalignment? I hope I don't run into any problems when I do my conversion.

Thanks for uploading the video...it really helps explain what some of us couldn't picture in our heads.


Ed

I just put the motor in the rolling chassis after a 4 year nuts and bolts restoration. The bike is not on the road yet due to a bad CDI.

[sharpy]

Can i just say its a engine. A motor is what starts it and a motor is whats in ure washing machine. OMG and i wonder why i have no friends lol

[dpascal]

Can i just say its a engine. A motor is what starts it and a motor is whats in ure washing machine. OMG and i wonder why i have no friends lol

I made sure that engine head bottom surface will receive a thorough planarization
Seriously... I will try the various fork tips offered here and update ...

IMG-20161203-WA0010.jpg