.png "Powered by vBulletin")
I have a bad fork seal so I will be replacing them both IF it ever warms up!!! According to the service manual for my 1978 GS550, use 50/50 ATF and 10W/30 motor oil. Which type of ATF and standard vs synthetic oil? This would be a little cheaper than buying pre-mixed fork oil but does anyone have an opinion as to which is the better alternative? Thanks!
-
-
10 or 15 weight fork oil is what most use. Depends on how firm you like the ride and your weight.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Just buy regular fork oil and not worry about itCowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"Comment
-
"Pre-mixed fork oil"???
That's like looking for "pre-mixed engine oil".
I read some suspension tuning tips from the manager of a race team several years ago. His philosophy for the race bike was to use the lightest oil that would damp the suspension just enough to keep the wheel on the ground. 10w fork oil seems to work for most of us.
While you have the forks apart, consider upgrading the springs, too. Your springs are now 40 years old and have been compressed the whole time, so I'll bet they are sagging a bit more than desired. A set of new Sonic Springs and the 10w oil will make you think you have a new bike under you.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
I'm old school and mix atf with whatever 10/40 or 15/40 I am using for the motor and whatever atf is lying around. The forks had a lot of sludge so it suited me to change often for the first few years of ownership.
This gave me a chance to experiment and my target now is around 15W effective.
ATF has a bigger effect than you think on thinning the motor oil. There is a lot of stuff on the web about mixing different viscosities.
If I remember correctly you would typically use 2:1 engine oil to atf if your target was halfway between the two.
The viscosities on atf bottles are not directly comparable with motor oil weights so a bit of research is needed to be sure you're comparing apples with apples.Last edited by Brendan W; 04-15-2018, 04:13 AM.97 R1100R
Previous
80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200Comment
-
I just run straight ATF. Feels fine to me.Comment
Comment