Announcement

Collapse
No announcement yet.

My rear brake is dragging

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by Noreg View Post
    I did not. But after washing my bike today they seemed better, so this makes sense, the pressure hose could have moved some rust around. I will try tomorrw.
    That would be really cool if it was something simple like that. I hope it is.
    Roger

    Current rides
    1983 GS 850G
    1982 GS1100GK

    https://visitedstatesmap.com/image/AZARCACOIDILINKSMONVNMOKTXUTWYsm.jpg Gone but not forgotten 1985 Rebel 250, 1991 XT225, 2004 KLR650, 1981 GS850G, 1982 GS1100GL, 2002 DL1000, 2005 KLR650, 2003 KLX400, 2003 FJR1300

    Comment


      #47
      Let me ask, is the brake dragging, or just rubbing? Disc brakes have no way to push the pads back away from the rotor.. The pressure is released & the pads still actually rub (touch) the rotors a little, not enough to try to slow the wheel, actually just touching the rotor. If yours aren't dragging enough to make the rotors pretty hot while riding, it can't be dragging very much, any pressure constantly pressing (dragging) the pad against the rotor should cause a lot of heat. Try put the bike on the center stand, prop it up to get the front wheel off the ground, squeeze the brakes, then release them. Then turn the front wheel, see if this rubbing is the same as you hear on the rear? Just something to try.
      Last edited by rphillips; 05-30-2020, 09:36 PM.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

      Comment


        #48
        Originally posted by rphillips View Post
        Let me ask, is the brake dragging, or just rubbing? Disc brakes have no way to push the pads back away from the rotor.. The pressure is released & the pads still actually rub (touch) the rotors a little, not enough to try to slow the wheel, actually just touching the rotor. If yours aren't dragging enough to make the rotors pretty hot while riding, it can't be dragging very much, any pressure constantly pressing (dragging) the pad against the rotor should cause a lot of heat. Try put the bike on the center stand, prop it up to get the front wheel off the ground, squeeze the brakes, then release them. Then turn the front wheel, see if this rubbing is the same as you hear on the rear? Just something to try.
        You bring up some excellent points.

        I don't believe it is opperating as it should, when on the centre stand the rear wheel won't spin freely. But the heat is not a lot (it gets a lot warmer from just a tiny bit of using the rear brake). There is two sounds, one is something hitting once every tire rotation, the other is like a scraping one.

        I will try the centre stand thing, but Ill have to buy a 2x4 and stores are closed on monday (bank holiday), so it will be a bit. I will try to take the pads out and sand the metal clip things for rust tho.
        GS1000G 1981

        Comment


          #49
          Dang, shouldn't need to buy anything. Use the jack from your car to just lift the front end, bike on center stand, raise the front wheel & roll a basketball under the front of the eng., Heck just a neighbor to sit on the rear seat, with bike on center stand, long enough to spin the front wheel
          1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

          Comment

          Working...
          X