1979 gs 750e

[gssteve]

Just need some advice on rebuilding my carburetors. That have not been used for 10 years.

1) What parts do I need to purchase?
2) Where in Australia can I get them?
3) If not who can call on?


By the way great web site:clap:

steve

 

[terrylee]

Should only need o-rings from "cycle-o-rings", get carb. boot o-rings too. Maybe bowl gaskets, any suzuki dealer could get those, if not check ebay. And a good carb. cleaner to soak carbs in after broken apart, not sure what you have there. Don't buy full carb. kits, not worth the money, just change o-rings, use old jets (clean till no clogs). That should be all you need. Well except tool to sync. them once you get them back on bike and get it running. If you haven't check carb. rebuilds on Basscliff's site, do so. terrylee

 

[gssteve]

1979 gs 750 e

1979 gs 750 e

Thanks Terry Lee

Have ordered the bits you suggested.
Any thoughts on the intake boots and the carb holders?
Who can I get them from?

steve

 

[terrylee]

They should be available from Suzuki, you might try Z1 enterprises, has lots of gs stuff on thier site. Also check Basscliff's site, there are lists of suppliers for lots of stuff on his site. If your boots are still in good shape and not hard as plastic you maybe ok, but of course if you can afford them it can only help. terrylee

 

[gssteve]

Found the parts on the Nederlands site and should have them in the next week. Let you know how I get on thanks again Terry Lee