• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

2-3 no spark

  • Thread starter Thread starter JEEPRUSTY
  • Start date Start date
J

JEEPRUSTY

Guest
OK so after a period of degeneration my bike stopped firing the 2-3 plugs.
Checked pri resistence and its 4.1 for both coils
Its 25k ohms on the secondary.
Manual says 30-60 is the acceptable range.

Signal generator resistance specs are Ok at 350 ohms each

SO all ressitance readings are the same for all components but no spark from 2-3. I suspect ignitor so I try another known good working ignitor same symptoms.

So I grasp at straws and ask is it possble to connect the primary inputs from 1-4 to coil 2-3 in an effort to see if it the ignitor?

Its dark and damp and the mosquitos tried to drag me off

Oh and the voltage to the coil primaries is high 10-11 v both sides
 
JEEPRUSTY said:
Its 25k ohms on the secondary.
Manual says 30-60 is the acceptable range.
Click to expand...

NGK caps? Seems the 5k NGKs are usually 5k less than the stock caps. That would be +10k if you're using NGK.

JEEPRUSTY said:
So I grasp at straws and ask is it possble to connect the primary inputs from 1-4 to coil 2-3 in an effort to see if it the ignitor?
Click to expand...

Not just possible but recommended. See if the no spark condition follows the plug or the coil. Try a continuity test of the coil ground wires from the ignitor.

What's your battery voltage? High 10V range could be a 2V drop.
 
mike_of_bbg said:
NGK caps? Seems the 5k NGKs are usually 5k less than the stock caps. That would be +10k if you're using NGK.



Not just possible but recommended. See if the no spark condition follows the plug or the coil. Try a continuity test of the coil ground wires from the ignitor.

What's your battery voltage? High 10V range could be a 2V drop.
Click to expand...


I am using brand new 5k NGK caps.
Battery is fully charged.

I will have to face this in the morning damn I hate mosquitos.
 
This damn DD3-2 thing is improperly listed on dynateks site it seems.
I would buy one today to get rid of this old crap.

Spyug where is you fix?
 
You must log in or register to reply here.
Back
Top