D
Druro
Guest
Basically like the title says, i have access to a gsxr exhaust for cheap, but i don't know if it would fit on an 83 1100E. Any thoughts?
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
I have heard it is possible with some modification. Certainly not a bolt on deal, or I would know about it. PM a member named katman, he has put almost everything GSXR on a GS mill at some point or another, and would likely know.
R
RJ
Guest
Unfortunately you probably won't be able to use that exhaust. All GSXR's from '93 on up are water cooled. That means the cylinder spacing is different from the GS. So carbs won't fit, exhaust won't fit. However if you're looking for newer vintage parts Bandit 1200, and I think 600, stuff should fit as they are oil/air cooled, although I'm not sure about the type of collars used to bolt the headpipes to the head. Bolt spacing may be different.
S
sidd
Guest
Won't work without a hassle. The spacing on the outer ports is too narrow, and the whole thing sits too close to the engine. I have full stainless yosh race system sitting in my friend's garage, just sitting there, looking pretty for that reason. GRRRRR.
It could be made to work, but it would be quite an ordeal if you did it yourself, and expensive if you had someone else do it.
If you want an inexpensive system, the vance & hines systems are pretty popular for our bikes (ok, mines a 750) and can be had for new at around $300.
It could be made to work, but it would be quite an ordeal if you did it yourself, and expensive if you had someone else do it.
If you want an inexpensive system, the vance & hines systems are pretty popular for our bikes (ok, mines a 750) and can be had for new at around $300.
I got a 1994 1200 bandit exaust to fit on my 1979 gs 750. sounds awsome too i just cut off my collars on my old pipes and the ones off the bandit and welded the old to the new. worked great just measure the distence between the pipes and total ditance on all four and you should be fine. mine fit tight when putting them in but i just squeeze em and get um in the holes no problems yet.
Similar threads
