Airbox and choke

[avbove38]

I moved this to Electric forum just so im in the right section.

thanks for all the help on this topic.

Thats what I said from the start. It doesnt make sense to put money into the bike before I get it started.


Since we are on this topic. I am not getting any spark. I have new spark plug wires correct for the bike. I am getting power. It turns over. The previous owner removed the points and replaced it with a dynatek electonic ignition. I checked all the wiring connections as when I bought the bike the guy said he kept blowing a fuse. I found out the problem and corrected it. It is all wired to the color diagram I have.

question is, is there a way to tell if this ignition he installed is working. A test?. im thinking it could be the coils as they are original but I want to eliminate this ignition first before i move on to something else since someone else installed it and obviously had no clue how to wire the bike.

Any other suggestions are greatly appreciated.

 

[tigerfan474]

Listen to octain. I tride pods on a non running bike and couldn't get it started after a carb rebuild. I put the airbox back on and it fired right up. Ran like crap, but after a carb sync it runs great. Get it runnin.

 

[avbove38]

Listen to octain. I tride pods on a non running bike and couldn't get it started after a carb rebuild. I put the airbox back on and it fired right up. Ran like crap, but after a carb sync it runs great. Get it runnin.

im not getting any spark. thats why it wont start. Im sure it will once i fix the issue. I dont think the pods are any concern right now. and i havent done a thing to the carbs yet.