77 GS750B. Had trouble a while back with gas getting in the crankcase. Rebuilt carbs (the right way) and replaced petcock. No more trouble with the crankcase filling up (actually the opposite but that will be a different post).
I have K&N pod filters installed by the PO. Looks like the original breather hose and it just hangs above the carb rack. I noticed on long rides that stuff would drip out of this hose, land on the hot crankcase, and stink...a little like gas.
I attached this little bottle to the frame and put the valve cover breather hose in it (pics below). It has been on here about 2000 miles now and has a few ounces of foamy, milky, stuff that smells a little of gas.
I guess the big questions here are: 1) Is this bad? and 2) What should I do?
Any suggestions?
Thanks,
gbw
I have K&N pod filters installed by the PO. Looks like the original breather hose and it just hangs above the carb rack. I noticed on long rides that stuff would drip out of this hose, land on the hot crankcase, and stink...a little like gas.
I attached this little bottle to the frame and put the valve cover breather hose in it (pics below). It has been on here about 2000 miles now and has a few ounces of foamy, milky, stuff that smells a little of gas.
I guess the big questions here are: 1) Is this bad? and 2) What should I do?
Any suggestions?
Thanks,
gbw