Carb slide diaphram repair

[Guest]

I have been reading a lot of diaphram repair threads on line. What one Guy says will work another says it won't. I have a spare set of carbs I'm thinking about rebuilding I know there are holes in the diaphrams. I'm looking for a cheap good fix if there is such a thing. Has anybody found one that works? Thanks Mike

 

[Guest]

I have been reading a lot of diaphram repair threads on line. What one Guy says will work another says it won't. I have a spare set of carbs I'm thinking about rebuilding I know there are holes in the diaphrams. I'm looking for a cheap good fix if there is such a thing. Has anybody found one that works? Thanks Mike

I just found a place where they sell replacement diaphrams. Check it out, jbmindustries@att.net.

 

[fishfarm]

I have been reading a lot of diaphram repair threads on line. What one Guy says will work another says it won't. I have a spare set of carbs I'm thinking about rebuilding I know there are holes in the diaphrams. I'm looking for a cheap good fix if there is such a thing. Has anybody found one that works? Thanks Mike

Have you seen this?

Carburetor diaphragm repair that works

http://www.kawasakimotorcycle.org/f.../92592-carburetor-diaphragm-repair-works.html

 

[Nessism]

Buy used but good slides. Problem solved.

 

[salty_monk]

I think Chef 1366 has successfully used some kind of spray on adhesive rubber...

 

[Guest]

Have you seen this?

Carburetor diaphragm repair that works

http://www.kawasakimotorcycle.org/f.../92592-carburetor-diaphragm-repair-works.html

I have seen that. But someone else came back with a post that it didn't work and ruined there Diaphram. I did find a place that sells new diaphrams for $19.50.

 

[Guest]

I think Chef 1366 has successfully used some kind of spray on adhesive rubber...

Someone posted that the spray on rubber would make your the throttle responce slow.

 

[7981GS]

I didn't know that ANYONE made them.

http://jbmindustries.com/Yamaha650.html

Daniel

 

[Guest]

Someone posted that the spray on rubber would make your the throttle responce slow.

dUE TO THE EXTRA THICKNESS OF THE SPRAY ON RUBBER But if Chef says it works, it I bet it will.

 

[Guest]

I didn't know that ANYONE made them.

http://jbmindustries.com/Yamaha650.html

Daniel

I looked at that jbm web site New Diaphrams for mukuni CV BS34 carbs and others.

 

[Assaf]

I did find a place that sells new diaphrams for $19.50.

Hi, I need to replace my diaphragms - BS32s
I'll check out the jbm link
Where did you see some for $19.50 Mike?

Any other suggestions where to buy?

Thanks

 

[Assaf]

hmmm... jbm don't seem to do the 32s

 

[hampshirehog]

http://www.nrp-carbs.co.uk/shop/

 

[Assaf]

oof!
that's a good price Mr Hog, but they're out of stock for mine.
grrr...

Wrote to them anyway.
Thanks

 

[Assaf]

I have BS32SS Carbs (GS850G 1986 - same carbs as 1983)

I wrote to jbm and asked if they have BS32SS diaphragms and they responded:
"If you have measured and found that our BS34SS won't fit, then I have no other ideas. I have never seen that carburetor."

I take it BS34s are a different size and that the diaphragm won't fit my bike, right?
or wrong?

thanks

 

[Guest]

Found this place

Found this place

I didn't buy any just tried to glue the pin holes shut. I did find this place. jbmindustries.com add. 3761 Morley Drive, Kent, Ohio 44240 Phone#330-678-9537 On the website there are even pictures of how to put their replacements on. I saw $19.95 I think that was the ordering price. For each. Mike