D
dude608
Guest
I want to clean the chain. what can I soak it in or spray on it?
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
S
spyug
Guest
Kerosene, mineral spirits, paint thinner or naptha makes a good bath if you pull the chain and let it soak for a day or so. Get a good parts cleaning brush and give it a good scrub. Dry off and lube with proper chain lube or chain wax.
If you are doing the cleaning with the chain on the bike spray with WD40, PB Blaster or your penetrating fluid of choice. A used tooth brush can be helpful in cleaning out the grundge. Dry off and lube as above.
One word of caution. While you can use WD40 or any of the penetrating fluids to clean, these are not appropriate lubes so take a trip to the local bike store for something recommended.
If any of the links are badly corroded or if any of them bind you should change the chain as it could let go at any time. While you are at it you should also have a look at the sprockets for wear or bent teeth and replace as appropriate.
Good luck and Cheers,
Spyug.
If you are doing the cleaning with the chain on the bike spray with WD40, PB Blaster or your penetrating fluid of choice. A used tooth brush can be helpful in cleaning out the grundge. Dry off and lube as above.
One word of caution. While you can use WD40 or any of the penetrating fluids to clean, these are not appropriate lubes so take a trip to the local bike store for something recommended.
If any of the links are badly corroded or if any of them bind you should change the chain as it could let go at any time. While you are at it you should also have a look at the sprockets for wear or bent teeth and replace as appropriate.
Good luck and Cheers,
Spyug.
Last edited:
M
Mark M
Guest
This statement needs qualifying. If it is not an O-ring chain, then you need to lube after the WD-40 cleaning. If it is an O-ring chain, you need do nothing after cleaning it unless you live in a very high humidity climate or the bike lives outside.
Mark
8
80GS1000
Guest
Motul Chain Clean, then Maxima Chain Wax works for me. 
Really ! Holy cow, you mean all that PJ-1 ive been spraying all over the driveway was useless ? Let see what others have to say...
Word to the wise....
If you think you can speed up the chain / sprocket cleaning operation by running the Bike on its center stand and hold a rag against said chain or sprocket...be careful. I had a buddy do it and, as you may have guessed, he got a finger to go all the way around between the chain and sprocket. Ouch !!!!!!
M
Mark M
Guest
I wouldn't say useless, I would say unnecessary. I have at least 35000 km on my last several street bikes with WD-40 cleaned / no lube chains with no issues at all. My GSXR is at 9500+km without even needing an adjustment yet and my ZX-9 had near 30K on it with the original chain and still going strong when I sold it.
One thing to note is that the dry chain attracts far less dirt and grit, which reduces the wear and tear on the outside of the chain due to abrasive wear. Probably also saves the sprockets, but I can't say for sure.
This only works in dry climes and indoor stored bikes, as I said. If your bike lives out in the elements or you live in a very humid area, you may need to lube the chain simply as protection against surface rust. Also only O-ring type chains, non O-ring types MUST be lubed if you want them to live.
Mark
M
Mark whiz
Guest
For cleaning purposes, I just use a paint brush to brush on kerosine, working the stuff into all the nooks & crannies on the chain. Then I wipe it dry and relube. After a warm up ride I'll then check the chain adjustment as a clean chain tends to be a tad looser than one that needed cleaning.
S
ShirleySerious
Guest
I'm not quite sure what kind of chain I have. My '78 550 has the original chain, AFAIK. I didn't know if WD-40 or lithium grease was OK to use, so I put on a glove and poured a little motor oil in my hand and greased up the whole chain. Anyone else do this?
Factory service manual calls for washing the chain in kerosene every 600 miles and lubricating with high viscosity motor oil.