• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Engine painting

  • Thread starter Thread starter runewolf
  • Start date Start date
R

runewolf

Guest
He guys,
While I'm sorting out why I can't get my bike to start... I'm thinking of doing some painting. I've read some of the other threads about painting engines and still have a few questions... Can I paint the Valve Cover with 500 degree paint or does it have to be the 1200 deg? How bad is it to remove bolts/screws after painting?
 
One more question... The disks on each side of the engine that has the DOHC and Suzuki on them... How do you remove them?
 
You really don't need high temp paint for the valve cover at all. On the cylinders and the head use 500 degree paint, and on the header used 1200 degree paint. The case and cover just require a quality paint. I did use the PJ1 500 degree gloss black on my covers but mainly because it was a quality paint and because I had a couple of cans on hand.

The disks can be removed using a screw driver to carefully pry them off but chances are very good that you will ruin them. Some people (me for one) just left them off.

Here is what mine looked like - orginaly the engine was silver:

06-2004.jpg


Hap
 
Yep that's what I intend to do, leave them off... I just couldn't see a way of removing them easily and didn't want to try to pry them unless that was the only way. The paint I am considering using on the valve cover is rated for 500 degrees and if this all works out, my bike will be .... unique.
 
VHT makes a 1200 degree clear paint that seems to work well for engine covers and the like. The engine does not get this hot of course but the paint itself cures at high temperature and has excellent chemical resistance which is always nice in case of a fuel spill.
 
Hap,
Since you have that very nice pict of your bike all painted up.... Can you answer my one question? How damn bad is it going to be to get any parts back off this bike if I paint it? Or do I need to break all the screws/bolts loose right after painting it?
 
runewolf said:
Hap,
Since you have that very nice pict of your bike all painted up.... Can you answer my one question? How damn bad is it going to be to get any parts back off this bike if I paint it? Or do I need to break all the screws/bolts loose right after painting it?
Click to expand...

I normally paint my engine when I'm rebuilding so I paint each part seperately. When I do touch up painting (one of the great things about having a black engine) I normally lean the bike over to the left, pull the clutch cover and the ignition cover and paint them off the bike. Then I do the same for stator cover and the front sprocket cover. One reason I do this is because when I paint the covers, I have the oven heated to about 350 to 400 degrees. When I have my final coat on the cover, I put them in the oven for a few minutes to cure the paint. It gives a very glossy hard finish. I them reinstall the covers with 316 stainless allen head bolts.

I don't do the heat curing on the valve cover because I'm afraid that it might warp the cover.

Hap
 
LOL, ok damn I was afraid you were going to say that! My wife will kill me if I tell her I'm taking the bike apart again, so I was planning on removing the highway bars, the exhuast, airbox and carbs and bagging/taping off anything else in the way and painting the engine. I do want to get the stainless steel kit and replace all the screws/bolts to set off the new paint. Hmmm... maybe vaselining the screw heads before painting....
 
You must log in or register to reply here.

Similar threads

G
Overheating GS850g
Replies
10
Views
285
Nessism
Nessism
SamLack99
How To Get Paint Off An Engine?
Replies
9
Views
222
Nessism
Nessism
R
mechanical advance limited range GS550
Replies
2
Views
90
Nessism
Nessism
F
Engine Knock
Replies
19
Views
341
DimitriT
DimitriT
niclpnut
Plastics painting vs metal
Replies
1
Views
103
nvr2old
nvr2old
Back
Top