G
Guest
Guest
I wasn't really sure whether to post this in the suspension section but about a week ago I found a leaking fork seal on my GS750 so I disassembled and replaced both. During the re-assembly I noticed the tire was rubbing on the side of the front fender. After some adjusting of the fender bolts I got it to clear, but just barely. I've never had this issue before during re-assembly so I'm guessing it got bent somehow.
My question is if there is a good way to straighten the chrome fenders without cracking the chrome? I also have a crack in the fender (see picture) that I attempted to stop drill, with temporary success. Any idea on fixing the crack and re-plating? Or am I better off finding a replacement?

My question is if there is a good way to straighten the chrome fenders without cracking the chrome? I also have a crack in the fender (see picture) that I attempted to stop drill, with temporary success. Any idea on fixing the crack and re-plating? Or am I better off finding a replacement?
