• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

First time GS1000 owner

  • Thread starter Thread starter FLHGSRay
  • Start date Start date
F

FLHGSRay

Guest
Just bought a '79 GS1000, 1 owner, 26,000 miles. Bad battery, got a new one ready to go in. Drained the oil, changed the filter, realized I need the o-ring that goes on the filter cover, and also the o-ring on the filler cap. Pulled the tank to dump the old fuel and found a pair of Accel Super Coils! The yellow plug wires and aftermarket electronic ignition were hints. Stopping at dealer today for o-ring. Finish oil change, battery and fresh gas tomorrow. Check the plug gaps. Then decide whether I need to pull the carbs for a cleaning. If it runs well, it'll be time to decide on removing the dresser stuff. Then check the brake pads and lines and order new tires.
 
Where are you guys finding these damn 1000's and 1100's?!

I can't find one locally to save my life.

I'd pull the carbs and clean them anyways, and check the float height as well.
 
Found this one listening to a local Swap Shop on the radio. Decided I had to have it, so I sold a CL450 I had been tinkering on for about a year. Sold it through a Craigslist ad in about an hour. Guess I underpriced it. This GS will be a lot more fun on the highway than the CL was. So far I've gotten it started, rode it for about a mile.
 
Last edited:
Funny how these things always take on a life or their own. New battery, then in the middle of changing the oil, I decided I needed a new o-ring for the filter cap, another trip to the shop. Then decided to pull the clutch cover to clean the oil level sight glass. Had to cut a new gasket by hand. Pulled the tank to dump the old gas, saw the petcock was sealed with silicone. Pulled the petcock and cleaned that mess up. Hope a new o-ring for that is available. Then decided to pull the carbs, no sweat. Decided to pull the intake boots also, and had no trouble with six of the screws, two refused to budge. Got the Dremel out and cut a straight slot across each screw head and used Vise-Grips on a flat tip to bust them loose. Thanks, http://www.cycleorings.com/intake.html ! Ordered my carb and boot o-ring kits already, along with the SS screws. Lubed all the cables while they're hanging loose. Probably take at least a week to get the parts and finish the carbs. I'll take some of that time to check the brakes and if all is well, new tires are next! The only question is, do I reinstall the original airbox or go with the pod filters I'm already thinking about?
 
Install the original air box every time. Pods sucks literally. Noisy and are hard to get the carbs running great. I sent you my photobucket link havent i? You can see my airbox/filter setup on there.
 
Just keep it stock. Get it running properly. Wish you the best. I am working on a 78 1000 also. You may end up wanting some new boots for the airbox to make it easier to get in and out.
 
FLYSPRay, sounds like you got it going on. I know you're prolly pretty stoked to get this thing on the road but through all the excitement dont forget to check your valves. Lots of bad things can come from tight valves.
Most around here will also recommend redoing the entire brake system if no updates have ever been done on it. We're talknig the hole nine yards. New master cylinder rebuild, front and rear, along with rebuilding the calipers, new lines and new pads.:eek:
Really really bad things can come from old gummed up brakes.

Get the bike running correct with the factory air intake system first. Then if you decide you want pods, go for it. But keep in mind running pods will require some pretty extensive jetting mods that requires a good ear and a fair bit of talent and research to make run right.


Keep us posted and for goodness sakes post some dang pics!
 
The joys of owning a classic bike with history. One small job that just keeps on getting bigger and bigger with each thing you come across.

As for pods or airbox, I'm an airbox guy...
 
Krunk_Kracker said:
Where are you guys finding these damn 1000's and 1100's?!

I can't find one locally to save my life.
Click to expand...

I found this one in Clermont, Florida, what's that? about 60 miles away from Lakeland. It was listed on E-bay but also for sale locally. Found it the very day I started looking for one.

http://www.motorcycle-usa.com/photogallerys/Chris-Kings-GS1100E.jpg

I got my GS1000 in Oklahoma, cost $300 to have it shipped to Florida. I wanted one pretty bad, and GS1000's are farther and fewer between that GS1100E's.
 
Mine is bone stock with a little bit of richness added by raising the needles a bit. Runs awesome.
 
Sounds like you have things well under control, and doing things the right way, that bike is going to run sooooo sweet when it is done, following with interest.
Yes, where are the pics, you know we like pics........:p
 
Congratulations on your bike purchase and welcome. It's nice to read a thread from a new member where you understand that maintenance is all about.

Enjoy!:)
 
Thanks. This isn't my first rodeo, but it is my first Suzuki. Done alot of this stuff over the last 40 years, but am really enjoying it lately. I think it's the fact that it doesn't HAVE to be done anytime soon. No one is waiting for it, I don't need it for work, etc. I've got another bike when I want to ride. Can walk away from this one anytime. This seems like a great forum, lots of good info and pretty active. I bought this bike non-running, didn't take alot to get it started. Rode it about a mile then tore into it to clean the carbs and reseal the intake boots. Can't wait to hear it run again. 1-2 weeks away. Then I'll begin stripping it of the Windjammer and touring stuff the PO added in '79. May go back to bone stock for a while. Oh, and about the pics. We're on dial-up here, PhotoBucket is extremely slow. Been doing a few attachments. Any advice on posting pics is welcome. I may try loading them from my I-pod on wifi.
 
Last edited:
Why would anyone do this? PO wanted a little more noise, I guess. Was probably convinced it would give him more power. Apparently this allowed moisture to collect in the mufflers and rust them out. I guess since it's already ruined, I could weld it closed while I shop for a solution. Any ideas?
 
FLHGSRay said:
Why would anyone do this? PO wanted a little more noise, I guess. Was probably convinced it would give him more power. Apparently this allowed moisture to collect in the mufflers and rust them out. I guess since it's already ruined, I could weld it closed while I shop for a solution. Any ideas?
Click to expand...


People do some goofy stuff sometimes.
Just be forwarned though, those pipes are hard to find.
I think we had a few members searching for some at the same time.:confused:
 
From what I've seen with other bikes and AZR's 1000's is the pipes rust period.That's why good one's are few and far between.Not even looking for stockers for my Skunk project because I could not afford the shipping let alone the pipes:(
 
Got the cam chain tensioner resealed and reinstalled. Removed, anti-siezed, and reinstalled the vacuum port screws to make the sync easier later. Bead blasted the sealing surface of the intake boots and have new o-rings and SS screws ready to go on tomorrow. Got o-rings, bowl gaskets and top cover gaskets to rebuild the carbs. Should finish them by next weekend. Was dreading removing the exhaust bolts for fear of breaking them off, but I put a 1/4" ratchet on them and they all came loose. Will probably replace them with studs. Just testing them, not removing the exhaust yet. Really want to remove the Windjammer but have decided to wait until I get the bike running better. Removing it would surely make it easier to check the valve clearances. Also, I need a 1979 MO motorcycle license plate to use as a Historic plate if anyone knows a dealer for old plates.
 
Haven't touched the carbs for lack of time. Did install the intake boots and remove the Windjammer, rear crash bars and luggage rack. May have a line on a good, stock exhaust system. Hope that works out. Got to digging through the boxes that the PO included with the bike. I love it when the PO keeps EVERYTHING. I've got everything I need to reinstall the headlight and turn signals, plus the rear pegs and the paperwork for the aftermarket ignition and the Windjammer!
 
You must log in or register to reply here.

Similar threads

E
1982 GS650E More Ignition Issues & Gremlins
Replies
3
Views
155
EmmCee
E
B
Continued Hard Starting Woes
Replies
14
Views
333
Alexander
Alexander
brit7.11
GS425 Oil Consumption. Problem?
Replies
14
Views
376
brit7.11
brit7.11
crazyramen
Low Compression in 3 Cylinders 100 Miles After Rebuild
Replies
16
Views
319
rphillips
R
gwyon
re-rehabbing a 1978 GS750
Replies
7
Views
191
rphillips
R
Back
Top