S
stunner67
Guest
I put clubman bars on my 82 GS550L to get rid of those awkward stock handlebars. I would have definitely ate it if I kept them. The choke is hard to hold along with the clutch lever now that they are in a straight line. Any suggestions on how to make that a little easier to reach? Maybe a choke, turn signal, hi/lo headlight switch assy from another model?
I want to put forward foot controls on the bike as well. The stock set it just too close to the seat for me to be comfortable. Has anyone done this? Any suggestions on what bike would be a good donor to use? I'm on a tight budget and hate to go aftermarket.
PS. I put an 750L swingarm on the back to upgrade the drum to a disk brake. It was a complete arm/brake/wheel/master cyl. Bolted right in and lined up perfectly. I was hesitant to make any mods, but thanks to the help on this forum, I took the plunge with successful results. Also put a set of Triumph mufflers on to get rid of the 80s cones but still keep it quiet. Thank you all for your posting your experiences and knowledge.
I want to put forward foot controls on the bike as well. The stock set it just too close to the seat for me to be comfortable. Has anyone done this? Any suggestions on what bike would be a good donor to use? I'm on a tight budget and hate to go aftermarket.
PS. I put an 750L swingarm on the back to upgrade the drum to a disk brake. It was a complete arm/brake/wheel/master cyl. Bolted right in and lined up perfectly. I was hesitant to make any mods, but thanks to the help on this forum, I took the plunge with successful results. Also put a set of Triumph mufflers on to get rid of the 80s cones but still keep it quiet. Thank you all for your posting your experiences and knowledge.
Last edited: