• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Front fork removal

  • Thread starter Thread starter Clumzi
  • Start date Start date
C

Clumzi

Guest
I'm trying to remove the front forks. I've completely loosened the pinch bolts at the top and bottom of each fork but they don't seem to want to budge. Am I missing something? The shop manual (as I take it) just says the top and bottom pinch bolts are holding the fork but they're stubborn. I'm guessing this is just rust, I was going to hit the area around the pinch bolts with PB Blaster and give the top of the forks a whack with a rubber mallet. That a sound idea?

I've never done anything like this. Getting the front wheel off without a tragedy made me giddy :). If the question is obvious I apologize. Doing my own work is a new experience for me. -nick
 
Hey Nick,
I can't help with that question, but I know that others can and will respond here. I just relate to your newfound situation as your own bike mechanic. Like you I depended for years on bike shops until I found that they just weren't giving the work on my 27 year-old machine the attention I thought it deserved.

These folks are very knowledgable and will help you every step of the way if you ask. I've got a new confidence in the stuff (carbs, cables and electrics) that I worked on this summer with the help of the GSR.

Cheers, Ted
 
Clumzi said:
I'm trying to remove the front forks. I've completely loosened the pinch bolts at the top and bottom of each fork but they don't seem to want to budge. Am I missing something? The shop manual (as I take it) just says the top and bottom pinch bolts are holding the fork but they're stubborn. I'm guessing this is just rust, I was going to hit the area around the pinch bolts with PB Blaster and give the top of the forks a whack with a rubber mallet. That a sound idea?

I've never done anything like this. Getting the front wheel off without a tragedy made me giddy :). If the question is obvious I apologize. Doing my own work is a new experience for me. -nick
Click to expand...


How man bolts are there 6 or 4
the fiche looks like 2 ma be hidden under the decorative trim thwit suzuki on it
 
This is a pretty common problem but something that we can all struggle with at times :rolleyes:

what you will probably find is that if you remove the top yoke the forks will become easier to move through the bottom one & if not then you can very gently prize the slot open slightly while pulling & turning the fork leg

once you get some movement it will become quite easy :)

Oops quick edit if you have removed all the bolts of course as above lol
 
Twist them to break them loose from the rubber bushings. If you have the nut on the top of the tube try to gently turn them. Mine came out OK but after replacing the rubber bits the yoke had to be loosened to get them back in.
 
Flaggo60 said:
Hey Nick,
I can't help with that question, but I know that others can and will respond here. I just relate to your newfound situation as your own bike mechanic. Like you I depended for years on bike shops until I found that they just weren't giving the work on my 27 year-old machine the attention I thought it deserved.

These folks are very knowledgable and will help you every step of the way if you ask. I've got a new confidence in the stuff (carbs, cables and electrics) that I worked on this summer with the help of the GSR.

Cheers, Ted
Click to expand...

I'm not sure I would even consider doing this work without the forum here. I certainly would never have tackled the carbs (twice!) without the cleaning .pdf and folks here.

I'll try prying a bit, along with something to grease everything up. -nick
 
Clumzi said:
I'm not sure I would even consider doing this work without the forum here. -nick
Click to expand...

I'm with you there, friend. I bought this bike because I knew I could get a $500 bike under the wife's radar. Of course, I've doubled that in parts...

This site has really given me the confidence to try and fix things that I thought were way beyond my skills. Yesterday I replaced the water pump in my Ford Exploder. I figure, if I can replace my valve shims, and sync my carbs, I can dig into the car with no problem. It only took 6 hours and 8 trips to Autozone, but I got 'er done! If BassCliff had a step by step tutorial with pics, it would have gone a lot faster.

I'd rather be riding than wrenching, but it certainly gives you a new love for your machine if you've rebuilt it. It feels good to make something work...
-=T=-
 
Do you have the wheel, fender and calipers off? There is one binch bolt at the very top and two at the bottom of the triple tree. Use a twisting motion to break them loose. Keep at it they will come out.
 
chef1366 said:
Do you have the wheel, fender and calipers off? There is one binch bolt at the very top and two at the bottom of the triple tree. Use a twisting motion to break them loose. Keep at it they will come out.
Click to expand...

lol, thanks, but I found my own way :). I found a new use for a carb gang plate. God I wish I had a digital camera to show you guys pictures. I tried the twisting motion, but I don't think Andre the Giant could have twisted those bitches off. I got a crescent wrench and broke the seal via the hex head on the top of the forks but still couldn't for the life of me twist and yank from the bottom. That's when I took the gang plate from the spare set of 650 carbs I have laying around here and used it as a punch and hammered the bastards out :). Actually, for such a sketchy idea it worked great. Now I can't get the new forks on there (new thread in a minute :)). -nick
 
Jam a large screwdriver into the upper and lower triple tree slots where the pinch bolts reside. This forces the clamp to open just a bit so the tubes slide out easier.
 
Road_Clam said:
Jam a large screwdriver into the upper and lower triple tree slots where the pinch bolts reside. This forces the clamp to open just a bit so the tubes slide out easier.
Click to expand...

Good call. That's how I got the new forks back in, by wedging the upper pinch bolt with a screwdriver and greasing the top of the forks up a bit. -nick
 
Hi, Mr. Brown did you try www.explorerforum to get your info? Great place for ranger broncos and explorers, and no I'm not trying to change to subject. Its the only way to go to get some great info. There are a couple of ford sites I use and a couple of bike sites also. This one has a great amount of info. I am in same boat as you, only a parts replacer. I am not afraid to ask beg or coerse people for help.:pray: so keep chugging along it has got to get better.:-k
 
You must log in or register to reply here.
Back
Top