• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Gs 1100 left end crank breakage

  • Thread starter Thread starter 4cyl h2
  • Start date Start date
4

4cyl h2

Guest
Where at on the left end do these usually break? Any pictures? Thanks for any input
 
Greetings and Salutations!!!

Greetings and Salutations!!!

Hi Mr. 4cyl h2,

One of our engine gurus should be along later. But in the meantime let me greet you with my "mega-welcome". :)

If you are here you probably have a 30 year old motorcycle that needs about 20 years worth of maintenance. You'll find all kinds of helpful tips, procedures, manuals, diagrams, "how-to" guides, etc, in the links below. Let's get started.

Let me dump a TON of information on you and share some GS lovin'. :D

I just stopped by to welcome you to the forum in my own, special way.
big_hi.gif


If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
hat1.gif


Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. This is what NOT to do: Top 10 Newbie Mistakes. Now let me roll out the welcome mat for you...

carpet.jpg


Please Click Here For Your Mega-Welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike! :D

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff
 
Thanks for the welcome looking foward to being part of the site looks like a greate one!
 
Any drag racers out there can maybe help? Heard this was pretty common
 
Ray will know (rapidray). Not sure if this email still works. suzukiray@yahoo.com

Mine suffered from the left end nut coming loose and then the starter clutch chewed the taper all to hell.
 
The GS1100 cranks don't so much have a rep for "breaking" as they do for chewing up the taper on the small taper cranks ('80-'82) like with what happened to BonanzaDave (among others). For stock to moderately hopped up engines the stock crank is solid and usually not a problem. For higher power applications the large taper crank ('83) is better being that like it's nickname says, it has a less trouble prone large taper and the crank pins are welded. For high power race applications a couple of racers here on the board like Ray (RapidRay) or Terry (BlowerBike) could be more insightful as to what crank mods or aftermarket cranks are usable for a given application.

Dave, I remember seeing the pic of your galled crank taper and it was pretty gnarly. However, I don't remember what you did to fix it. Did you have to replace the crank? Have it welded and reground? Or was it able to be dressed and reassembled?
 
Thanks for both replays I have heard ray is knowledgable I'll try emailing him. This will be used for drags and self starting but will have the magnet removed
 
they break at the main bearing.
when you go to remove the stator cover the rotor and all comes off with it..lol
with the snout of the crank inside.
i have seen this several times on stock motored street bikes...abused but still stock.
most the time as mentioned they spin the rotor.
the rotor taper gets larger and the crank gets smaller plus sometimes materiel is miss on both...like from a blow torch.
fill the bad spots and the complete taper with red locktite and impact it's bag off and let sit for 24 hours.
and pray or sell it...hehe
on a drag only bike you get away with the damage after removing the magnet.
and always!!!ALWAYS!!!
pull the clutch in before closing the throttle...letting these back down from high RPM's does the damage in the 1st place.

hell i'm bored most the time..
any question pertaining to 1100/1150 16v.
i'm always open to calls...information is free.
between cincy and dayton ohio if i can be of assistance in person pertaining to the models i have mentioned.
513.420.0123
terry
 
Last edited:
Your reply is much appreciated. I do have another? I'm doing some valve work on a dragbike I'm building and wondering if back cutting the valves is much advantage. And if so how much to cut them.
 
Homie said:
Did you have to replace the crank? Have it welded and reground? Or was it able to be dressed and reassembled?
Click to expand...

I used a coarse lapping compound to level out the high spots and true the damaged surfaces as best I could. Back and forth with the starter clutch a 1000 times. Cleaned it all up with some solvent, applied some permanent lock tite, hit it with the big 1/2 impact. So far so good.
 
Did you have a problem with the taper going on to far ( because of the wear) and loosing clearance at the starter gear
 
4cyl h2 said:
Did you have a problem with the taper going on to far ( because of the wear) and loosing clearance at the starter gear
Click to expand...

sometimes when it's bad..
you impact it on and then try to start it and the starter clutch stays engaged.
you then have direct drive and blow your starter a part..lol
fun fun
 
blowerbike said:
most the time as mentioned they spin the rotor. the rotor taper gets larger and the crank gets smaller plus sometimes materiel is miss on both...like from a blow torch.
fill the bad spots and the complete taper with red locktite and impact it's bag off and let sit for 24 hours. and pray or sell it...hehe
terry
Click to expand...

I've been thinking about this. I don't have to do anything with the rotor yet, but when the time comes that I do. Ok, so the specified torque value on the nut is something like 120 ft/lbs. My air impact wrench is rated at 580 ft/lbs @ 90 psi. Sounds like I could easily over-torque it if I'm not careful. If I "impact it's bag off" do you think it's possible to strip the threads, break the nut, or the worse case senario - break the crank snout off? Has any of this kind of stuff ever happened to anyone? Sometimes I wonder why didn't Suzuki didn't just machine the crank and rotor for a simple woodruff key?
 
don't think to hard tom.
keys didn't work on kawi's.
also if one is bigger and the other is now smaller and you do not tight the f*ck out of it....
guess what??
it will just spin off.
we are talking about a bad design and parts that are now damaged.
an impact is not going to push the rotor any farther that it is meant to go no matter how powerful it is.
your impact is also not going to break anything we are speaking of.
you throw the torque specs out the door on big stuff.
 
blowerbike said:
an impact is not going to push the rotor any farther that it is meant to go no matter how powerful it is.
your impact is also not going to break anything we are speaking of.
you throw the torque specs out the door on big stuff.
Click to expand...

Fortunately I don't have a problem with mine ... yet. But if the time ever comes where I have to do something with it I'll just crank up the air pressure and "impact it's bag off"! But why "pray or sell it"? Is it kind of like once it's been off it never goes back on like it is suppose to? It then becomes a matter of time before it spins itself off and chewing everything up in the process?
 
Homie said:
Fortunately I don't have a problem with mine ... yet. But if the time ever comes where I have to do something with it I'll just crank up the air pressure and "impact it's bag off"! But why "pray or sell it"? Is it kind of like once it's been off it never goes back on like it is suppose to? It then becomes a matter of time before it spins itself off and chewing everything up in the process?
Click to expand...

tom it appears to you 83's...
so this problem does not pertain to your equipment.
 
Dave, refresh my memory as to how you fixed that? Replace the crank? Weld repair? Or did you clean it up, reassembled and "impact it's bag off"?
 
You must log in or register to reply here.
Back
Top