R
Raeldin
Guest
Hello all,
I haven't ridden a bike in about 20 years. I recently got a '80 GS550E. It runs good but won't idle for long. It does idle high for a bit then low, then dies. Also dies at stop signs if I am not careful.
I was told when I got it that the rubber boots on the carbs (2 in particular), needed to be replaced because they were cracked and causing a vacuum leak. I have looked at the boots and they seem pliable enough, just wondering how accurate this information was or if it could be something else.
I am wanting to just replace what needs replaced now, and work on restoring it slowly as I ride.
Thanks
I haven't ridden a bike in about 20 years. I recently got a '80 GS550E. It runs good but won't idle for long. It does idle high for a bit then low, then dies. Also dies at stop signs if I am not careful.
I was told when I got it that the rubber boots on the carbs (2 in particular), needed to be replaced because they were cracked and causing a vacuum leak. I have looked at the boots and they seem pliable enough, just wondering how accurate this information was or if it could be something else.
I am wanting to just replace what needs replaced now, and work on restoring it slowly as I ride.
Thanks