• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

GS850 GL starting problem

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
I love my GS--when it's running! :roll:

Recently, my '80 GS850 had started running *really* bad, so I checked into it a bit, and compression on two cylinders had gotten a bit too low. So I sent the engine into my local shop for an overhaul.

Meanwhile, I did the carbs, with a set of Robert Barr's O-rings. Clean as a whistle, now, and looking good. I've got everything back together now.

But it just won't start without help! If I shoot starting fluid into it, it'll crank right up, and run like a top (I haven't synched the carbs yet, but the idle speed screw let me adjust it to about 1200 RPM, no sweat--so maybe the carbs aren't *too* far out of whack.). As soon as I kill it, it just refuses to restart. Shoot starting fluid in, and it cranks right up again.

Fuel petcock is fine, all eight boots (between air box and carbs, and carbs-intakes) are brand new. Engine compression is well within service limits now. Plugs are looking darkish tan after running for a bit, and air screws are 1 1/2 turns out.

Any clues? I'm ready to ride! :twisted:

--David
 
My GFs 81 GS650GL has a similar problem. When cold outside, the bike won't start with or without choke unless it's shot with starter fluid. But, when the weather is mild, it starts right up with no fluid. I hope someone has an answer for you that may also apply to my girlfriend's bike.
 
Uhm...yah.

Uhm...yah.

daveo said:
Are you using the choke?
Click to expand...

yup. In lots of different positions--everything from all the way in, to "out just a taste", which makes the engine race like mad when it's running, to all the way out.
 
OK,Since it will start with the starting fluid, fire it up, set the idle air mixtures for smoothest idle, balance the carbs (at idle and 3000 rpm)and recheck or reset the idle mixtures for smoothness, could just be that they're not close enough yet, are valves adjusted good? VStan, your GFs bike sounds like it may need the rings done, check compression.
 
My first guess is that the coil voltage is diminished due to multiple electrical connections that are each a little corroded. To test this, run a jumper wire from the positive terminal to the hot side of the coils and see if it starts right up. My second guess is that you have plugged choke tubes/circuits coming from the carb bowls.
 
daveo said:
OK,Since it will start with the starting fluid, fire it up, set the idle air mixtures for smoothest idle, balance the carbs (at idle and 3000 rpm)and recheck or reset the idle mixtures for smoothness, could just be that they're not close enough yet, are valves adjusted good? VStan, your GFs bike sounds like it may need the rings done, check compression.
Click to expand...

The valves were done by the shop that overhauled the engine; I'm happy enough with their work (their speed is another matter--don't get me started! :evil: )

Here's another oddity--Once started, last week, it was running like a top--no problems up to 5,000 RPM at all, very, very slight hesitation above that which cleared up after about a fifteen minute ride. But this morning, after the as-usual starting fluid start, it idles okay--just a little choppy--but has *no* power. Twist the throttle, and it stumbles, stammers, and pops a *lot*.

Ideas?
 
You must log in or register to reply here.
Back
Top