Has anyone swapped a zx11 front end?

[gs750s]

I'd like to upgrade my front end on my 750 SD to run radials without a USD fork. The bike has a stock 19" front wheel. Kawasaki ZX11-D forks are long enough and measure 43mm in diameter.
Should I use triple trees from a 89-90 GSXR1100 with them? Is there any other non-USD forks that could be used for fitting a 17x3.5 front rim?
Any suggestions would be welcome. Ground clearence is a big issue.

A 4.5" rear wheel from a RF600 is ready to go in the stock swingarm.

Thanks

 

[gs750s]

Here's a picture. http://www.bikepics.com/pictures/472371/ The anti-drive is broken so I disconnected it. I haven't a clue how to add a picture.
Hope it works.
[http://www.bikepics.com/pictures/472371/img]

 

[crag antler]

Here you go with the picture

All you had to do is put the

on the front and end of the properties.

Nice bike 8) 8) 8)

 

[HiSPL]

Hey, is that Dennis Leary?



:lol:

 

[Deeds]

I thought it was Christian Slater!

 

[crag antler]

Hey, is that Dennis Leary?



:lol:

Oh No 8O 8O 8O
it's HiSPL selling one of these 8O 8O

Beautiful black motored 83's :twisted: :twisted: :twisted: :twisted:

 

[crag antler]

Nice rims on the 83's too :wink: :wink: :wink:

 

[gs750s]

HiSPL,
Sweet GS1100E. Is that a Vance & Hines header with a Micron Canister?
Inquiring minds want to know.

 

[bobo]

nah, it's peter coyote !!!...b.b.

 

[HiSPL]

Hehehe....

Yup, she's for sale. But I have an interested party right now so you guys have to get in line!

The exhaust is actually a mac 4-1 with a stock Bandit 1200 can that I painted black on it. It is very quiet, but flows really well. I bought the bike with a V&H setup on it that was rusted through at the collector so I cobbled together this system on the cheap and it works really well.

 

[Guest]

Wow...very clean Katana! 8) Sure u wanna mess with it?


Tony.

 

[gs750s]

Sure I want to ticker with it. That's how it stays on the road and out of the junk yard. There was a lot of blood, sweat and money put into it. She was in rough shape when I first spotted her.

I can always swap back the original parts if it doen't work out. Besides, I enjoy working on the Kat as much as riding her. :twisted: