• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

help please

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Guest
Ok I'm at a loss here. just went out and synced my carbs. The crappy ass gauges i have for doing so are saying that they are synced but i still have a cold pipe and it dont run worth a crap. I have already done my valves , and they are all in spec. Is there anyone around me that could come over with a good sync tool and help me diagnose these carbs. As per my post the other day i had it running and then the next day it wouldnt run. Any one out there that could lend themselves to me would be greatly appreciated.
 
One other way to synch the carbs is to use a drill shank as a feeler gauge. You open up the throttle a little and close it (WITHOUT ANY TENSION) and use the drill shanks to check the throttle plate openings against the venturi. I have used this method and checked it with carb sticks and was surprised to see how accurate it ias. If your motor is worn out and there is different vaccuum on the intakes then obviously this will not work, but it will get you there if at least not real close.
 
Hi,

Is there another thread in which we can find some history of your issue and everything you've done to correct it? When a new thread gets started every time a different question is asked about the same set if issues, the history is much less convenient to find.

Are both cylinders sparking?



Thank you for your induglence,

BassCliff
 
You must log in or register to reply here.
Back
Top