S
scout127
Guest
Thanks to everyone that gave advice on my '83 GS850L. I have been posting on here for the past few months trying to figure it out, and lots of you gave great advice.
My problem was that when I hit the throttle the bike would die. I finally realized that the engine was not creating enough vacuum for those CV carbs to work. I had low compression so I rebuilt the top end: ring job, lapped my valves, and had to replace a few shims. The bike fired up and ran great on the first attempt!
Other necessary repairs: new intake boots and o-rings, carbs dipped and rebuilt, new coil wires and spark plug caps, cleaned every connection on the wiring harness.
Now I'm riding just in time for warm weather!
thanks!
My problem was that when I hit the throttle the bike would die. I finally realized that the engine was not creating enough vacuum for those CV carbs to work. I had low compression so I rebuilt the top end: ring job, lapped my valves, and had to replace a few shims. The bike fired up and ran great on the first attempt!
Other necessary repairs: new intake boots and o-rings, carbs dipped and rebuilt, new coil wires and spark plug caps, cleaned every connection on the wiring harness.
Now I'm riding just in time for warm weather!
thanks!