• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Need a pic of your electrical panel :)

  • Thread starter Thread starter mortation
  • Start date Start date
M

mortation

Guest
I am a jack a$$ and didnt take a picture of where all those darn wires go. My new battery box should be here in a day or two and I will need to reassemble my electrical panel :P

If someone could post a picture of their electrical panel (82 - 83 G/GL) I would really appreciate it. I need to see which wires go to battery, solenoid, etc. The ones without the handy dandy color coded jacks lol.
 
i can get you one. if you can wait until like 6pm tomorrow. wednesday
 
catbed said:
i can get you one. if you can wait until like 6pm tomorrow. wednesday
Click to expand...

Thats no problem at all. Battery box still isnt here yet and even when it gets here its gonna have to be painted :) Thanks!
 
Boy, I could really mess you up with a couple of pictures. :shock:

The panel on my wife's '82 850L has had a couple things added to it, but I can still guide you through what goes where. To really mess you up, I could toss a couple pictures of my Wing in there. The stock fuse/relay panel is impressive enough (first glance at the manual shows 13 fuses and 8 relays, and that's not all of them), but then I could show you the accessory panel that I added on the other side of the bike. 8-[

.
 
Steve said:
Boy, I could really mess you up with a couple of pictures. :shock:

The panel on my wife's '82 850L has had a couple things added to it, but I can still guide you through what goes where. To really mess you up, I could toss a couple pictures of my Wing in there. The stock fuse/relay panel is impressive enough (first glance at the manual shows 13 fuses and 8 relays, and that's not all of them), but then I could show you the accessory panel that I added on the other side of the bike. 8-[

.
Click to expand...

lol, I am trying to avoid getting messed up :)

Really everything is pretty easy thanks to connectors and colored wires. My issue is with connecting the battery and solenoid I guess as those were the things with just wires bolted on.
 
OK, the battery is easy. It goes into its little slot with the vent tube (unless you have a sealed battery) toward the front of the bike, and the positive terminal toward the rear. The solenoid bolts on to the left side of the battery box.

Here is a picture of my wife's cluttered electrical panel. I did not realize how much I really need to clean up the mess here until I took the picture.
IMG_4731.jpg


Also, as threatened, I tried to get a picture of the stock panel on my Wing, but you have to loosen the left saddlebag mount to get to the relay box, so I just removed the fuse box cover.
IMG_4733.jpg


Here is a picture of the accessory panel I made for my bike.
The big black strap going up the middle holds the battery into place. The black box with the white panel in the upper left is a relay box for isolating the trailer from the bike wiring. It has four relays that assure full voltage to the trailer lights.
There are two more relays below that box. The left relay connects power to the trailer to charge the small battery in the trailer that runs the dome light when the lid is up. The right relay is for future accessory lighting.
Below those two relays is a common grounding point. All the accessories I have added get grounded here, which is then connected to the battery with a single wire.
The fuse panel on the right has individual connections for front- and rear-seat heated clothing (also used for battery tender input), trailer lights, air horns, front accessories (GPS, satellite radio, etc.), and a spare for future projects. Below that is a self-resetting circuit breaker that powers the fuse panel and can also be used for a take-off point for anything requiring constant power.
The stock main fuse for the bike is under the black cover on the far right. It uses two 55-watt fusible links in parallel, to be sure it can handle the 90-amp alternator that has been installed. :cool:
IMG_4734.jpg
 
Thanks steve but thats not the same electrical panel I have. My fuse box doesnt have anything screwed into the bottom of it, and I have the square fuses. I guess its probably pretty similar.

Basically I was wondering.

Black wire goes from engine to - battery terminal. + battery terminal goes to which place on the solenoid? And what is the other post on the solenoid go to?
 
I guess the square fuses were one of the upgrades for '83?

There should be a heavy wire (usually black, but the electricity doesn't care) from the negative terminal on the battery to the engine and/or chassis. The positive terminal of the battery will connect to one of the large terminals on the starter solenoid. Electrically it does not matter which one, so just choose the one that makes sense when routing the wire. Usually, the right terminal goes to the battery. The other large terminal on the solenoid goes to the starter motor. The smaller wire on the solenoid will come from the starter button. There might also be a ground wire connected to the body of the solenoid.

There should also be a wire that feeds the main fuse of the fuse box. Some people route this to the battery, I prefer to route it to the stater solenoid. to minimize connections at the battery. Yeah, you don't have to change the battery very often, but since some people remove the battery (or at least the wires) to charge it, it still gets wires taken off of it more often than the solenoid.

.
 
Steve said:
I guess the square fuses were one of the upgrades for '83?

There should be a heavy wire (usually black, but the electricity doesn't care) from the negative terminal on the battery to the engine and/or chassis. The positive terminal of the battery will connect to one of the large terminals on the starter solenoid. Electrically it does not matter which one, so just choose the one that makes sense when routing the wire. Usually, the right terminal goes to the battery. The other large terminal on the solenoid goes to the starter motor. The smaller wire on the solenoid will come from the starter button. There might also be a ground wire connected to the body of the solenoid.

There should also be a wire that feeds the main fuse of the fuse box. Some people route this to the battery, I prefer to route it to the stater solenoid. to minimize connections at the battery. Yeah, you don't have to change the battery very often, but since some people remove the battery (or at least the wires) to charge it, it still gets wires taken off of it more often than the solenoid.

.
Click to expand...

Thanks! So two wires from the battery, one to the solenoid and one to the fuse box? Any idea where on the fuse box?
 
i have some pictures here:
2401195315_041c456cce.jpg


2401196701_83f534cc8c.jpg

left to right: fuse box, r/r, something, starter solenoid.
 
catbed said:
left to right: fuse box, r/r, something, starter solenoid.
Click to expand...

lol, I was in the same boat earlier, I asked under the couple of stupid questions post. Its an igniter. Thanks for the pics! Hopefully my battery box will be in this week!
 
mortation said:
Thanks! So two wires from the battery, one to the solenoid and one to the fuse box? Any idea where on the fuse box?
Click to expand...
That would depend on whether they changed the fuse box other than handling the square fuses.

In the three bikes I have available ('81 850, '82 650L, '82 850L), the top fuse handles the head and tail lights. The second fuse handles all the signals, that includes turn signals, brakes and horn. The third fuse is for the ignitor and the coils. The fourth fuse is the main fuse, the fifth one is for the accessory terminals at the end of the fuse panel. Your wire to the battery would connect to one side of the fourth fuse and also to the fifth fuse. The other side of the fourth fuse will lead to the ignition switch, and will meet the output of the r/r along the way.

Hope this helps.

.
 
Man I hope I did this right. I found two little circle grounds (Black wire, white stripe from the R/R & fuse box connector) and just ran a line from the engine and bolted them all together.
 
You must log in or register to reply here.
Back
Top