Need help with electrics please

[duaneage]

We measured the forward bias resistance of at least one diode when we talked on the phone and it was around 500 ohms. Each diode measures out at around 500-540 ohms each.

Replace with the RR I sent today and we test again. If it still does it look for a stator wire touching another wire in a harness somewhere.

The RR I sent you today developed 14.4 @3000RPM last night, my wife verified it by coming downstairs to ask me how much longer I intended to race motorcycle engines at 11:30 PM and she thinks it works plenty good enough too.

 

[gbw]

Quick Update

Quick Update

The RR I sent you today developed 14.4 @3000RPM last night, my wife verified it by coming downstairs to ask me how much longer I intended to race motorcycle engines at 11:30 PM and she thinks it works plenty good enough too.

I measured 14.6V @ 5k rpm. This was on the r/r output while the red wires were still connected. However, I only measure 13v across the battery at the same time. Shouldn't these be the same? If so I must have missed a dirty connector or something.

I get about the same measurements on both the r/r units you sent. Clearly this is not an r/r issue.

Anyway, I REALLY appreciate you ruling out anything by sending me the second r/r. You have been very helpful and clearly your reputation for providing a bullet proof r/r at a reasonable price and bending over backward to help a brother out is intact.

So, I still have really weak spark. I guess the next step is replacing the Martek ignition with stock and see if that helps. I think I've replaced everything else!