G
garagepunkfan
Guest
while tackling connector replacement on the harness side and on the gear indicator switch of the GS750EZ harness i'm adapting for my GS1100ED, i noticed something very odd.
there are 6 wires going into the hardshell connector of the switch itself (not including separate the blue neutral wire with the bullet connector), but on the harness, only 5 wires!
the 5 wire configuration made sense, following the schematic, but what's with the extra wire on the switch? then i got to thinking...they probably use the same switch on the GS550's and whatnot with the 6-speed.
sho nuff...
http://www.partzilla.com/parts/detail/suzuki/SP-37720-45100.html
there are 6 wires going into the hardshell connector of the switch itself (not including separate the blue neutral wire with the bullet connector), but on the harness, only 5 wires!
the 5 wire configuration made sense, following the schematic, but what's with the extra wire on the switch? then i got to thinking...they probably use the same switch on the GS550's and whatnot with the 6-speed.
sho nuff...
http://www.partzilla.com/parts/detail/suzuki/SP-37720-45100.html