Night Rider Update

[stiksave]

Just installed a rifle SuperBike fairing from e-bay. Repainted to match the bike, gloss black. Let me know what ya think.

Thanks,
Chris

 

[Anonymous]

Looks good to me! =D>

 

[Detman101]

Looks awsome!!

By the way. what Header is that you are using?
I want to emulate your exhaust and it is imposible with my MAC header.
There are no mid-pipes that will mount to it.

Thanks for the info.

 

[MichaelHoward]

Looks good! 8)

 

[ToddB3]

Fairing looks good and I know you will be waaaaay more comfortable at highway speeds! I'll take a stab at the exhaust-maybe a Hayabusa stock can and midpipe hooked up to a supertrapp header?

 

[stiksave]

The header is generic e-bay from a wrecker. It may be a super trap. The pipe is a carbon fiber off of an R1 Yammi, also e-bay. I also used a combo of reducers from the auto parts store, no clamps, everything fits together snuggly. Attached at the stock site on the footpeg mount with the R1 clamp. I had to cut down the midpipe by a few inches, and had to plug the hole where I knocked the rivet out to move the oem hanger. The tone is nice, not too loud, until you open her up. From head to tailpipe, about $55.00. "Cheap is Good, Free is Better".

Thanks,
Chris

 

[chrissinc]

That exhuast can is bigger than my leg!!!! Good job!

 

[beby99]

Re: Night Rider Update

Let me know what ya think

Hey Chris...looks good man, nice job.

Just a few suggestions: IMOP you should get rid of those big A##
front blinkers and just go with the ones on the fairing. Then swap
out the yellow front side reflectors with red ones. Just my .02

Also like picture #19 :lol: :lol: Thats going to cause an accident. :wink:

 

[stiksave]

Bret,

Thanks. The fairing had the lights on it when I got it. I thought about leaving them off when it was apart for paint. I also wanted to take off the stock lights, but the fairing lights are single element. I'd nead to change them out also. The reflectors are goofey, but Suzuki put them there.

Now that this is all together, here a question. Is the gear indicator supposed to be backlit? I don't want to pull it apart if it isn't. Also, I have a cheap tail light LED mod project I'm working on. I'll post it when completed. Should be soon.

Thanks,
Chris

 

[beby99]

The reflectors are goofey, but Suzuki put them there.

I used these in place of the reflectors....the yellow ones just did'nt look good:

 

[Anonymous]

Yellow (amber) side reflectors up front are a DOT requirement.