• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

No compression?

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Guest
OK, so no more clicking, the timing is set by the manual, it spins freely, all put together. Go to start it and... the starter spins, sounds more high pitch than usual. I assume because there is nothing resisting it, so no compression?
All the bolts are fitted tight, the crankshaft and camshafts spin... but doesn't start. I did not replace the head gasket (I know, I know, I should. I wanted to see if I could get by with the same one. I should hopefully get money tomorrow, so I can go buy one).

Here's a video for reference: https://vimeo.com/521670017
 
Last edited:
You can take the plugs out and feel with your finger if its moving air if you don't have a compression tester. Other than that, check for fuel/air and spark.
 
Jimmbuzz said:
You can take the plugs out and feel with your finger if its moving air if you don't have a compression tester. Other than that, check for fuel/air and spark.
Click to expand...

I don't have a deep socket to undo the spark plugs. I have to go buy one.
 
Not sure why you would attempt to start the bike without the valve cover on. Also not clear how you would check compression but with a compression gauge in the spark plug hole. Spark plugs that you haven’t taken out of the holes. :confused:
 
Rich82GS750TZ said:
Not sure why you would attempt to start the bike without the valve cover on. Also not clear how you would check compression but with a compression gauge in the spark plug hole. Spark plugs that you haven?t taken out of the holes. :confused:
Click to expand...

It wasn't catching, so it wouldn't start. I had to see if the camshafts were turning while the starter was engaged. It sounded higher-pitch than normal, so at I thought something wasn't turning properly.
 
the cams may be 180 degrees out of phase so no compression. It's easy to do.
 
Nessism said:
the cams may be 180 degrees out of phase so no compression. It's easy to do.
Click to expand...

Is it that simple? Could you elaborate? I can go get a picture of the camshafts.
I followed the guide set in the manual: Advancer set to T, 1 on the exhaust cam flush with the area where the cylinder head and head cover meet, 2 pointing upward. 20 pins over to the intake cam, where 3 is pointing. I'd upload pictures, but it keeps saying upload failed for some reason. I try an image link, that fails too.
 
Last edited:
Doesn't sound too strange.

ZombiePotatoSalad said:
I don't have a deep socket to undo the spark plugs. I have to go buy one.
Click to expand...

Do this, otherwise you can stop wrenching on your bike (You'll need one anyway to maintain your bike).

As usual, one needs air (and compression for ICE), spark and fuel to get combustion An old trick is to drop a teaspoon of fuel down the spark plug holes, this gets most engines to fire (for a few revolutions).
If not, you'll know that either there's an issue with the ignition or compression (or both), and can go from there. If it does, you can begin troubleshooting the carbs.
 
Last edited:
roeme said:
Doesn't sound too strange.



Do this, otherwise you can stop wrenching on your bike (You'll need one anyway to maintain your bike).

As usual, one needs air (and compression for ICE), spark and fuel to get combustion An old trick is to drop a teaspoon of fuel down the spark plug holes, this gets most engines to fire (for a few revolutions).
If not, you'll know that either there's an issue with the ignition or compression (or both), and can go from there. If it does, you can begin troubleshooting the carbs.
Click to expand...

I originally had one, but lost it when we moved.
 
ZombiePotatoSalad said:
Is it that simple? Could you elaborate? I can go get a picture of the camshafts.
I followed the guide set in the manual: Advancer set to T, 1 on the exhaust cam flush with the area where the cylinder head and head cover meet, 2 pointing upward. 20 pins over to the intake cam, where 3 is pointing. I'd upload pictures, but it keeps saying upload failed for some reason. I try an image link, that fails too.
Click to expand...

When you set up the cams as described, did the notches on the right hand side of the cams point inwards towards each other (correct) or outwards away from each other (not correct)?
 
2BRacing said:
When you set up the cams as described, did the notches on the right hand side of the cams point inwards towards each other (correct) or outwards away from each other (not correct)?
Click to expand...

Towards. I'd post a picture if I could.
 
Go buy a spark plug wrench and remove the #4 plug. Put your finger over the hole in the cylinder head and spin over the engine to see if you have any compression. If not, either the valve(s) are open or the cams are timed wrong.

Set the crank to 1-4T and then look in the cylinder and make sure the piston crown is at the top of the cylinder.
 
As I turned the engine manually, I heard what sounded like a hiss coming from around the left side of the engine.
 
Ok, I do feel compression when I put my thumb over the #4 spark plug hole. But it doesn't feel very strong. Like, not enough to launch a spark plug.
 
Spray some soap water all over the head and cylinders and crank it. If the head gaskets blown youll see bubbles wherever theres an air escape.
 
IF IT WERE ME........ I would take the head off, inspect for bent valves, and reset the cams. ALSO if you look at each shim bucket with the cam lobe facing up from the bucket you should see a lot of gap between the cam and the bucket if a valves bent...they tend to not let the bucket come all the way up like normal.
 
chuck hahn said:
IF IT WERE ME........ I would take the head off, inspect for bent valves, and reset the cams. ALSO if you look at each shim bucket with the cam lobe facing up from the bucket you should see a lot of gap between the cam and the bucket if a valves bent...they tend to not let the bucket come all the way up like normal.
Click to expand...

When you say "reset the cams," do you mean to take them out and redo them in the same way, according to the manual?
Remember, I'm autistic, you have to be descriptive.
 
It sounds like you're missing compression, you shouldn't be able to keep the spark plug hole closed with your thumb (given a compression stroke).

To be sure, you can borrow a compression tester (or buy a cheapo one, should be sufficient).

The hissing noise usually is a cylinder sucking in air, so given your reply re. the notches one could assume that your cams are at least close to correct timing.
 
Yes...by reset i mean reinstall them after checking things out in the head ( bent valves or damaged valve seats ). Following the manuals directions of course.
 
Just got the head gasket today (was supposed to arrive on the 16th). When daylight comes, I'll head outside and put it on.
 
You must log in or register to reply here.

Similar threads

oldGSfan
Something hinky with GS1100E starter or starter clutch?
Replies
16
Views
353
oldGSfan
oldGSfan
oldGSfan
A bit of help needed, GS1100E won't shift into gear and lever travel is excessive
Replies
5
Views
148
bonanzadave
bonanzadave
crazyramen
Low Compression in 3 Cylinders 100 Miles After Rebuild
Replies
16
Views
294
rphillips
R
E
Poor Man's Air Restrictors
Replies
1
Views
107
crazyramen
crazyramen
S
To remove the cyl head or not? That is the question
Replies
14
Views
280
sacruickshank
S
Back
Top