• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Oil Pressure Light

  • Thread starter Thread starter MNGS1000G
  • Start date Start date
M

MNGS1000G

Guest
Hello All! I just picked up a 1980 GS1000G and its Oil Pressure Light is always on. I have ridden it ( I know this could be a bad idea) and it drives just fine. So my question is, what should I be looking for? Is it possible it is nothing, and is there a way to tell. I don't want to run the bike without oil pressure...obviously. A previous posting mentioned checking the grounding, could that be the case here too. To my knowledge the previous owner didn't do anything with the gauges. Anyhow, you all are much wiser with these bikes than I am so I look forward to your thoughts.
 
Check the wire on the sensor-the sensor looks like a white plug attached in the center of a small plate on top the crankcase under the carbs. Take wire off and the light should go out, ground it to the engine and the light should come on. Check that and report back.
 
Also make sure that you have oil in the engine. :eek:

With the bike on the centerstand, the oil level should be visible in the sight glass on the clutch cover.

.
 
Yep, checked for oil before running the bike. Guy I bought it from just did an oil change. Can see said oil in window, and looks full.

I will check the wire suggested. I don't see any white plastic, but most of what is in there is dirty. Any other suggestions to make sure that I've got the right wire?
 
Use the search button and put oil pressure sending unit in... It will pull a photo, probably from Posplayer as he just changed his in his bike.
Curt
 
Greetings and Salutations!!

Greetings and Salutations!!

Hi Mr. MNGS1000G,

Mr. Nessism is describing the wire connected to the Oil Pressure Send Unit. Here's my GS850G, very similar to the GS1000G.

intake_repair49-1.jpg


I just stopped by to welcome you to the forum in my own, special way.
big_hi.gif


If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....:)

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike! :D

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff
 
Last edited:
I pulled the wire off the sensor and the light went off, I put it against the engine and it went back on. More thought?

By the way, thanks for the help guys!
 
MNGS1000G said:
I pulled the wire off the sensor and the light went off, I put it against the engine and it went back on. More thought?

By the way, thanks for the help guys!
Click to expand...

Basically, the sensor is just a spring loaded plunger that sits down over the oil feed port and completes the circuit ground for the light circuit. As oil flow comes up the port it pushes the sensor plunger out of the way thus disturbing the ground path - and turning out the light. Next thing I'd do is remove the two screws holding that small plate on and see if the sensor plunger is moving freely. Assuming it is, you need to get a gauge into the oil port on the side of the cylinder and take an actual measurement. The oiling system is very robust; about the only thing that can completely stop oil flow is if the clutch basket is loose to the point where the gear driving the oil pump is disconnected (which is unlikely). Only other thing I can think of is if someone botched with the oil system flow by installing an oil cooler.
 
Last edited:
That motor will be happy with 3-4 lbs of pressure. The light is working so I would take the sending unit out and clean it or try a different one. Try a different oil filter? Messy way !! Start it with the sending unit out to see if it pumps oil out.
 
Clean both contact surfaces with light sandpaper. This includes the surface inside the cases.
 
chef1366 said:
Clean both contact surfaces with light sandpaper. This includes the surface inside the cases.
Click to expand...

The light is on all the time, sanding the surface will only increase the chance of the light staying on by improving the ground.:D
 
You must log in or register to reply here.

Similar threads

S
Engine oil problem
Replies
5
Views
120
Rich82GS750TZ
Rich82GS750TZ
S
81 Suzuki GS650G - oil pressure light flickering on hard stop - marginal pressure?
Replies
11
Views
306
chuck hahn
chuck hahn
D
1982 GS1100EZ Parts bike (complete)
Replies
7
Views
204
D Icard
D
T
1979 GS750 points
Replies
1
Views
78
Big T
Big T
crazyramen
Low Compression in 3 Cylinders 100 Miles After Rebuild
Replies
16
Views
293
rphillips
R
Back
Top