M
Matchless
Guest
Hi,
If you find some of the special rubber seals such as the front Master Cylinder Cover rubber or the petcock seal is pitted, or even brake dust covers that are deformed by corrosion or pressure and is still intact and not brittle, then clean it carefully with some dish washing detergent and then immerse in boiling water for a couple of minutes. The original shape should return and the seal will be and look nearly as good as new.
If you can rather replace, but beware that some after market seals (non OEM) are sometimes made of inferior material and the older repaired one may even be of better quality!
If you find some of the special rubber seals such as the front Master Cylinder Cover rubber or the petcock seal is pitted, or even brake dust covers that are deformed by corrosion or pressure and is still intact and not brittle, then clean it carefully with some dish washing detergent and then immerse in boiling water for a couple of minutes. The original shape should return and the seal will be and look nearly as good as new.
If you can rather replace, but beware that some after market seals (non OEM) are sometimes made of inferior material and the older repaired one may even be of better quality!