rebuilding my 83 GS750e motor

[helmutholderbenz]

Hi everyone. I decided to rebuild my motor over the winter. bought a new to me head and had a valve job done new seals had the valve guides checked, this is in tip top shape! When I split the cases I found that I needed to buy a new crank because mine was so grooved up the machine shop said I couldnt regrind it and get bearings to fit. Anyway I got an excellent crank for only $50 (L11-12R)---ABAAAA. My machine shop gingerly polished it up. I'm very pleased with it. My question is about the oil jets in the transmission journals, I boggered the end up on the one with the smaller holes (left side) At the time they appeared to be the same so I ordered a new one. on further inspection I noticed the holes were different sizes and I had ordered the wrong one. My question is con I put in the new one I bought in place of the one I messed up or will it affect oil pressure or something? If the answer is no I cant then what about reusing the one with the boggered end? When I say boggered up I mean nothing is messed up below the oring, I just broke an ear off trying to get it out. I replaced all the orings in all the jets, even the 4 that are on the main journals. every one of my jets were clogged up by the way! Anyway, If someone could give me advice on my oil jet problem I sure would appricate it. Thanks, Helmut. PS. Im taking lots of pictures of my build and will post soon

 

[Nessism]

I'm not exactly following you about ears on the oil jets but whatever, I'd get the proper parts.

Oh, and just a reminder that OEM gaskets are best.

 

[helmutholderbenz]

I'm not exactly following you about ears on the oil jets but whatever, I'd get the proper parts.

Oh, and just a reminder that OEM gaskets are best.

When I say ear I mean that the jet is slotted on top, rather a deep slot and one side got broken off due to me prying on it. (I should have used a easyout) But like I said, nothing is wrong with it below the oring. how do I post a picture along with my reply???

 

[helmutholderbenz]

Here is what I'm talking about...

 

[silverhelme]

This site http://www.alpha-sports.com/suzuki_parts.htm seems to have the best break down of parts and if you navigate to the crankcase page for your bike you will see that there are 3 different jets available depending on the location.