• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Red R/R Wire

H

Hokano12

Forum Apprentice
Hey guys,
Was doing some tests on my gs425 stator/R/R today and noticed the red wire coming from from the R/R led into the harness then I lost it after that. Did some research and found that some people just connect that red R/R wire directly to the battery with an 15amp inline fuse and they noticed a good change in voltage/charging. I did a couple of the quick tests and at 2500rpm I was getting about 12.6v and at 5000 I was getting 12.8v. Would running this inline fuse straight to the battery make any difference with charging or would I just have to replace the stator?
 
I have not examined the wiring on a 425, but I don't think it would be much different than any other GS.

One the larger GSes, the overall wiring goes like this:
Power flows from the battery, through the MAIN fuse, to the ignition switch, back to the rest of the fuses, then to the individual components. The red wire joins between the MAIN fuse and the ignition switch. Wired like that, when you turn the bike ON, then hit the starter button, the bike is running on the only source of power available, the battery. Once the engine is running and the stator is turning, the output of the R/R will start to provide more than the battery. As the R/R output increases, it will provide everything the bike needs, then the excess goes the other way from the joint to charge the battery.

In that wiring diagram, the 15 amp MAIN fuse powers the bike before the R/R takes over. The bike requires about 10 amps, so that's not a problem. When the R/R takes over, It might put out up to about 20 amps. 10 will go to power the bike the rest will go back through the MAIN fuse to charge the battery. If you move the connection point, you may overload the MAIN fuse. Putting in a larger fuse will overload the wiring. Please keep the wiring stock, unless you change the harness to include properly-sized wires.

.
 
Ok, I believe there is only 1 main fuse on the gs425. Did the no load alternator test per the owners manual and each test indicated 70 volts AC (satisfactory for the gs425). Looks like I will be upgrading to an sh775 r/r soon here. I will keep the stock wiring configuration. Thanks for the reply Steve!
 
Hokano12 said:
Hey guys,
Was doing some tests on my gs425 stator/R/R today and noticed the red wire coming from from the R/R led into the harness then I lost it after that. Did some research and found that some people just connect that red R/R wire directly to the battery with an 15amp inline fuse and they noticed a good change in voltage/charging. I did a couple of the quick tests and at 2500rpm I was getting about 12.6v and at 5000 I was getting 12.8v. Would running this inline fuse straight to the battery make any difference with charging or would I just have to replace the stator?
Click to expand...

Are those voltages at the battery terminals? Have you checked the drop between the r/r negative and the battery negative and similarly on the positive side. Ideally these line drops should be of the order of 0.1 Volt.
 
You must log in or register to reply here.

Similar threads

drewandkellie
Cluster lighting bulbs
Replies
3
Views
88
drewandkellie
drewandkellie
P
Unknown short, no power anywhere
Replies
8
Views
201
Puntachu
P
S
SH775 wire harness guidance
Replies
5
Views
219
bren
bren
dandypop
GS850G Won't Start, Electrical Issue, No Spark
2 3
Replies
54
Views
861
dandypop
dandypop
W
installing a volt meter on gs1100e
Replies
14
Views
298
salty_monk
salty_monk
Back
Top