G
Guest
Guest
Hi all,
thought id take the 850 out for a spin, she doesnt get out much, about 15 months since she was last out. 1980 GS 850L. Battery is just of the charger and under a year old but it would only turn her 4 or 5 times till it started to turn real slow and it was tested only 4 months ago. She was like this last time out to but with a different battery which was faulty. I took the starter off and apart last night, blew it out with the air line tonight, there was ALOT of dry dirt, the small screw from the winding to the brushes wasn't realy tight but wasn't slack either and it looked real good in there. So "IF" the battery and starter are ok what should I look to next ? What prompted me to ask a question, I went to replace the starter and noticed a round hole about 1/2" in the crank case below the starter with only a hose/tube in it about 3/16" like a breather to the gear box, with no seal/grommet in it. Should I seal this up not to allow access from any foreign materials or is this weep hole to allow debri to disperse from below the starter ? Sorry to go on a bit, you can say that again, thanks Guys.
thought id take the 850 out for a spin, she doesnt get out much, about 15 months since she was last out. 1980 GS 850L. Battery is just of the charger and under a year old but it would only turn her 4 or 5 times till it started to turn real slow and it was tested only 4 months ago. She was like this last time out to but with a different battery which was faulty. I took the starter off and apart last night, blew it out with the air line tonight, there was ALOT of dry dirt, the small screw from the winding to the brushes wasn't realy tight but wasn't slack either and it looked real good in there. So "IF" the battery and starter are ok what should I look to next ? What prompted me to ask a question, I went to replace the starter and noticed a round hole about 1/2" in the crank case below the starter with only a hose/tube in it about 3/16" like a breather to the gear box, with no seal/grommet in it. Should I seal this up not to allow access from any foreign materials or is this weep hole to allow debri to disperse from below the starter ? Sorry to go on a bit, you can say that again, thanks Guys.