H
Hornswaggle
Guest
After doing the tests from the stator papers I found I need a new stator for my '81 GS450T and was going to order the Ricks one from BikerBandit but the picture they show does not match what I have. Mine has 18 poles and only three wires, the photo they show has 10 poles and several wires with the gommet looking only 3-4 inches away from the stator:
http://www.bikebandit.com/rick-s-motorsport-electric-stator?mg=3598&t=1&td=1
So they I look at what Z1 and Electrosport offer and their photos match what I have, the Z1 is more expensive but has the grommet, wire sheath, and connectors that I need. The Electrosport looks like I would have to reuse the grommet and put on my own sheath and connectors but is less expensive. I'd like to go with the Z1 based on this but BikerBandit also has the case gasket I need and it would be nice to get everything from one source.
There is so much info on this forum on stators that has been very helpful, I just wondered if anyone had any insight into why the photo of the Ricks stator was so different than the others.
Thanks for your help!
Kevin.
http://www.bikebandit.com/rick-s-motorsport-electric-stator?mg=3598&t=1&td=1
So they I look at what Z1 and Electrosport offer and their photos match what I have, the Z1 is more expensive but has the grommet, wire sheath, and connectors that I need. The Electrosport looks like I would have to reuse the grommet and put on my own sheath and connectors but is less expensive. I'd like to go with the Z1 based on this but BikerBandit also has the case gasket I need and it would be nice to get everything from one source.
There is so much info on this forum on stators that has been very helpful, I just wondered if anyone had any insight into why the photo of the Ricks stator was so different than the others.
Thanks for your help!
Kevin.