• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Stripped oil drain plug?

  • Thread starter Thread starter Junkie
  • Start date Start date
J

Junkie

Guest
I bought my bike with a somewhat stripped oil drain plug. At this point it's stripped even worse and I can't get a decent seat at all... it constantly drips, even on a cold engine. Not good.


What's my best option? It's $75 + shipping for a brand new oil pan, which seems to be a fairly easy replacement... is there something else I'd be better off doing? I'd like to do it right so this doesn't happen again, even though I've never stripped one.





If anybody has a spare 83+GS(X)750/GS700 oil pan with good threads I'd like it...
 
I dont know if this is stock

I dont know if this is stock

But my 83 GS1100ED has a helicoil in the pan for the drain plug :-s. I dont remember that on the GS750 so it might be a way to salvage the pan and make it stronger. :)

Pospalyr
 
Be careful it's not too long as it will bottom out (had this prob on my 1000G with a magnetic plug).

If you get one, let us know what one you went with & how it worked out...

Cheers,

Dan :)
 
I would do a new oil pan, but getting the pipes off can be a nightmare if an exhaust bolt breaks off. The oversize plugs are an option but remember there is not a lot of metal down there and it might not work.

Torque on the bolt is only 7lbs/ft so use a torque wrench when tightening. 7 is not very much at all.
 
I believe it already has an oversize plug, it certainly doesn't look like a stock one. I've changed the oil before on bikes with the plug into an aluminum case, and never had an issue before - as I said, it was stripped already when I got it.

As for getting the pipes off, it's an aftermarket header that I don't think has been on there for all that long - so I doubt it'll be too bad.
 
Dozens of options - this is what is recommended for Harleys. It would work on most bikes. It's just that it's on a chopper website -
http://www.chopperscycle.com/page/VTS/PROD/54-382/28336

This one looks pretty good. It actually puts a new 'female' part into the sump (oil pan) so that you never need to worry again. Not sure if there would be enough room to do this on a bike but I have seen this done on race cars (as in these pics). ftp://70.226.52.38/installpdf/drainplug.pdf

Both of these are just two examples of dozens of different products. Most auto parts suppliers will be able to sell you numerous different styles of repair kits.
 
Last edited:
I used an expanding rubber plug in an old Ford for years. As noted, there are dozens of options.

By the way, the stock threads (at least on a GS850 and the other shafties) are 14mm diameter X 1.25mm pitch, same as a spark plug. This is convenient because there are lots of options for repairing spark plug threads that will work for an oil pan.

If/when you remove the oil pan, any good machine shop should be able to install a more permanent fix.

I would avoid Helicoils, though. A Helicoil will eventually come out with the drain plug -- they should only be used on assemblies that are not disassembled, and even then only if that's all you can get (I'm not a big fan of these stupid things).

There are FAR better solid thread inserts available. I installed one when I built my GS850 engine last year, and it's quite nice to know there are permanent hardened steel threads in there now.
 
Last edited:
Get a Fram easy drain oil plug kit, I think they go as high as 14 mm which is too big, but you can have the pan drilled and tapped for it. To drain the oil just turn a 1/4 turn and that's it. They don't sell them in the standard size.

If I ever have to take the pan from mine I'm doing that, it's probably the only thing Fram makes I would use.
 
[If anybody has a spare 83+GS(X)750/GS700 oil pan with good threads I'd like it...[/quote]


I don't know if it will work but I have a used 81 oil pan with plug. I picked up at the junk yard after the first oil change on my GS750. The plug had been over torqued and the threads weren't in the best of shape. I cleaned out the threads and never had any problem with the drain plug so I never needed the oil pan.

If it will work I'll sent it to you for the postage.

Mike
PM me if you want it.
 
bwringer said:
I used an expanding rubber plug in an old Ford for years. As noted, there are dozens of options.

By the way, the stock threads (at least on a GS850 and the other shafties) are 14mm diameter X 1.25mm pitch, same as a spark plug. This is convenient because there are lots of options for repairing spark plug threads that will work for an oil pan.

If/when you remove the oil pan, any good machine shop should be able to install a more permanent fix.

I would avoid Helicoils, though. A Helicoil will eventually come out with the drain plug -- they should only be used on assemblies that are not disassembled, and even then only if that's all you can get (I'm not a big fan of these stupid things).

There are FAR better solid thread inserts available. I installed one when I built my GS850 engine last year, and it's quite nice to know there are permanent hardened steel threads in there now.
Click to expand...
I know about them coming out, and it sucks... happened on the cam cap on a race-prepped (37whp vs 27 stock, through stock intake/carbs/exhaust) EX250 engine I have, that was a PITA...
 
it appears to be a different part number, but thanks a ton for the offer
 
Well I ordered a used one online for $37 shipped, should be here pretty soon I think

of course, I ordered some stuff (including the oil pan gasket) from bikebandit and only now do they tell me it's backordered...
 
duaneage said:
Buy a roll of gasket paper for 6 bucks and cut your own, it's easy and fast.
Click to expand...

There's a gasket making guide on my little website (link in sig), provided by Mr. Suzuki_Don. Check it out.


Thank you for your indulgence,

BassCliff
 
The only gasket I buy is the valve cover, and I might try to make one of them next time I do the valves. They charge WAY too much for gaskets, never have them in stock, and make u wait a week for it.
 
I guess next time I won't order one, but I already did... if I don't get it reasonably quickly I'll just buy some gasket paper.
 
You must log in or register to reply here.

Similar threads

S
Valve oil seals & the rope trick - any detailed guide on disassembly order?
Replies
9
Views
240
Buffalo Bill
Buffalo Bill
J
Not Brand New, But New
Replies
5
Views
111
JPRICE91990@GMAIL.COM
J
stru0121
Hello (and thanks!) from Wisconsin
Replies
7
Views
228
stru0121
stru0121
I
GS400 clutch rod seal and cam chain noise.
Replies
1
Views
76
LAB3
LAB3
martin_montreal
1978 GS750e Yoshimura Racking Exhaust - blocks oil drain plug - ideas?
2
Replies
20
Views
402
martin_montreal
martin_montreal
Back
Top