Announcement
Collapse
No announcement yet.
Potential GS850 update...
Collapse
X
-
Potential GS850 update...
The bike I was looking at getting is NOT a 83 GS850, it's an 85 GS550L (VIN verified through insurance company). Also, the owner can't find the title to it, and doesn't want to file for lost title due to health problems, and is now wanting to throw it in as a parts bike for a 79 GS850G that he has for sale.Tags: None
-
Trilug
This is the 79 GS850G that the guy has for sale. Someone put pods on, and from the sound of it, they didn't do the jets. She is really boggy until you get the RPMs up a bit.
I can get the pair for a grand, but the 550 would have a bonded title, or would be parts.
Would it be worth getting?
The Kawasaki (OHC400?) in the background is for sale at $100, as is. They couldn't get it started, and the fuel tank has a hole in it (can see daylight through it).
Any thoughts would be helpful. Advantages and disadvantages of each bike, is it worth it, or should I run?Attached Files
-
Trilug
Here's a better pic of the Kawasaki. The previous owner passed, and this one doesn't have a title either, hence it's price.Attached Files
Comment
-
The 850 looks good. May be right about the jetting. If it runs with no mechanical noises I would be in there. The drilling of the front discs puts me off a little. Seen a few 78/79 bikes drilled DIY and that one looks a bit severe.
The 400 for a hundred is a steal if you have the time and space to get it back.97 R1100R
Previous
80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200
Comment
-
Trilug
Stupid question, would the airbox from the 550 fit the 850? They are different carbs, not sure if the spacing was the same though.
Comment
-
mnferwerda
The 550 as parts bike for the 850 doesn't make a whole lot sense since not much will switch over. The 850 looks good decent but you should inspect it carefully to see what it will need. I bought a pretty clean '83 GS850 for $250 that had been sitting for 10 years and still put in close to $1600 to get it up snuff ( was missing a title and carbs though).
Comment
-
Trilug
Honestly I'd rather get the 550 titled, because aside from the 20+ years of maintenance, she seems to run without issue. Might get the Kawasaki titled, and tell my 17 year old that she can have it if SHE figures out what is wrong with it and SHE fixes it. No bringing it to the shop, and no having others help her other than online.
I think It would be awesome to be able to get at least 1 ride in with my dad and my daughter. Dad's last ride was about 30 years ago when he and I went out together before he sold his 77 KZ750LTD.
Comment
-
The 550 will be useless as a parts bike for the 850.
About the only parts that you can move from the 550 to the 850 would be the caps on the tire valve stems and the light bulbs.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Trilug
I'm going to have to do some checking now that I know what the brown one actually is. I was told it was an 850, and that they thought they had the title, but found out it was the wrong title. I'm wondering if they have the right title, and just don't realize it because they thought it was a different bike than what it actually is. I really don't want to part out any of the three that I looked at, as they are complete, and I have seen 2 of them running.
The Kawasaki may be another story. It has compression when it is kicked over, but they couldn't get it to turn over with the starter. I have a few ideas of possible culprits, including contacts, bad battery, wiring, and starter.
Comment
-
Originally posted by Trilug View PostI'm going to have to do some checking now that I know what the brown one actually is.
The bike in the first picture looks to be black and red to me. That one actually looks like an '81 850GL. A 550 would not have dual disks on the front wheel. Does the bike have a chain to the rear wheel or a shaft?
The '79 850G does appear to be a '79 850G.
The Kawasaki appears to be a KZ400. Not sure of the year, but based on the paint pattern, it might be a '75.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Trilug
The bike in the first pic looks brown to me. But I'm partly color blind, it may just be the patina messing with my eyes. It is a shaft drive, like the 79. I'll admit I don't know much about UJM identification. When I called the VIN in to my insurance, they said the VIN came back as an 85 GS550L. I'll be able to stop by later and take some closer pics, just let me know what you want to see.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35615
- Torrance, CA
Unless you enjoy wrenching and fighting with the DMV I'd pass on the lot. The bikes could likely be reformed at a cost but it will require money and a lot of time.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35615
- Torrance, CA
Oh, and here is your original thread. Starting a new thread as an update of the last fragments the discussion and makes it difficult to follow.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Trilug
Comment